Recherche

Afficher tous les résultats pour

Accueil

Publication

Size effect of welded thin-walled tubular joints

Publications associées (26)

Page 2 sur 3

À propos
Confidentialité
Mentions légales

Graph Chatbot

Multiaxial fatigue analysis of high-strength steel welded joints using generalized local approaches

Martin Antonio René Garcia

The objective of this thesis is to improve methods for predicting the fatigue life, multiaxial or not, of mild- and more particularly high-strength steels using local approaches that have the capacity to be applicable to almost any cases, hence the term ge ...

EPFL2020

Experimental evaluation and modeling of fatigue of a 316L austenitic stainless steel in high-temperature water and air environments

Wen Chen

Austenitic stainless steels is used in many components of nuclear power plants, particularly in the pipes of cooling systems. Owing to power transients and to start-ups and shutdowns, these components are subjected to thermo-mechanical loadings (low-cycle ...

EPFL2020

Performance of Embedded Bolt Shear Connectors

Scott Walbridge, Matthew James Sjaarda

A laboratory research program carried out at the University of Waterloo featured the testing of three large-scale steel-concrete composite beam specimens with embedded bolt shear connectors. A detailed assessment of the connector performance was made, faci ...

TAYLOR & FRANCIS LTD2020

3D laser shock peening - A new method for improving fatigue properties of selective laser melted parts

Roland Logé, Christian Leinenbach, Nikola Kalentics, Manuel Ortega Varela De Seijas

Although Selective Laser Melting (SLM) currently revolutionizes the way parts are being manufactured, certain process inherent limitations such as accumulation of residual stresses and increased porosity content can lead to a decrease in fatigue life of pr ...

ELSEVIER2020

Instability of Thin Concrete Walls with a Single Layer of Reinforcement under Cyclic Loading: Numerical Simulation and Improved Equivalent Boundary Element Model for Assessment

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida, Angelica Rosso, Lisandro Arturo Jimenez Roa

Thin reinforced concrete walls may fail due to out-of-plane instability when subjected to seismic loading. While previous numerical studies on wall instability have focused on the behaviour of members with two layers of vertical reinforcement, this work ad ...

TAYLOR & FRANCIS LTD2022

Stress ratio effect on tension-tension fatigue behavior of angle-ply GFRP laminates

Thomas Keller, Anastasios Vassilopoulos

The effect of the stress ratio (R = sigma(min)/sigma(max)) on the fatigue behavior of (+/- 45)(2s) angle-ply glass/epoxy composite laminates was investigated by comparing their mechanical, thermal, and optical properties under the stress ratio of 0.5 with ...

2019

Load history effects in fibre-reinforced polymer composite materials

Abdolvahid Movahedirad

Today, it is widely accepted that fatigue is one of the most common failure mechanisms in structural components, and pure static failure is rarely observed. Engineering structures are subjected to complex mechanical fatigue loading histories, which cause d ...

EPFL2019

Creep effects on tension-tension fatigue behavior of angle-ply GFRP composite laminates

Thomas Keller, Anastasios Vassilopoulos, Abdolvahid Movahedirad

Angle-ply (±45)2S glass/epoxy composite specimens have been subjected to pure creep and tension-tension constant amplitude fatigue loading interrupted at max by creep intervals lasting for 2 or 48 hours in order to examine the effects of creep loading on ...

2019

Quasi-static shear-compression tests on stone masonry walls with plaster: Influence of load history and axial load ratio

Katrin Beyer, Francesco Vanin, Shenghan Zhang, Michele Godio

This paper describes quasi-static cyclic shear-compression tests on six plastered single-leaf stone masonry walls. Of the six walls, four are tested under different axial load ratios, performing a cyclic load history with two cycles per increasing drift de ...

2019

Strengthening of metallic members under mixed mode fatigue loading using prestressed CFRP plates

Ardalan Hosseini

The strengthening of existing steel structures against high-cycle fatigue (HCF) loading has become one of the most important topics of interest in structural rehabilitation. Apart from the conventional strengthening techniques that incorporate bulky and he ...

EPFL2019

Page 2 sur 3

Multiaxial fatigue analysis of high-strength steel welded joints using generalized local approaches

Martin Antonio René Garcia

EPFL2020

Performance of Embedded Bolt Shear Connectors

Scott Walbridge, Matthew James Sjaarda

TAYLOR & FRANCIS LTD2020

Instability of Thin Concrete Walls with a Single Layer of Reinforcement under Cyclic Loading: Numerical Simulation and Improved Equivalent Boundary Element Model for Assessment

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida, Angelica Rosso, Lisandro Arturo Jimenez Roa

TAYLOR & FRANCIS LTD2022

Strengthening of metallic members under mixed mode fatigue loading using prestressed CFRP plates

Ardalan Hosseini

EPFL2019

Experimental evaluation and modeling of fatigue of a 316L austenitic stainless steel in high-temperature water and air environments

Wen Chen

EPFL2020