Local current measurement in a solid oxide fuel cell repeat element
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Iridium dioxide electrodes form part of the dimensionally stable anodes (DSA®) and this electrode material is widely used in many industrial processes namely water electrolysis, metal electro-winning, cathodic protection and electro-organic synthesis due t ...
Organic light emitting devices (OLED) are among the most promising future technologies for the manufacture of flat and inexpensive displays. Although OLEDs provide already much higher brightness as compared to liquid crystals devices (LCD), they have a maj ...
The chemical and electrochemical promotion of highly dispersed nanofilm Rh catalysts (dispersion: about 10 %, film thickness: 40 nm) has been investigated for the first time. To this end Rh metal was sputter-deposited, either on a purely ionic conductor (8 ...
Self-assembled monolayers (SAMs) of redox-active molecules on mesoscopic substrates exhibit two-dimensional conductivity if their surface coverage exceeds the percolation threshold. Here, we show for the first time that such molecular charge transport laye ...
A bipolar filter press-type elec. rechargeable Zn/O2 battery has been developed. Reticulated copper foam served as substrate for the zinc deposit on the anodic side, and La0.6Ca0.4CoO3-catalyzed bifunctional oxygen electrodes were used on the cathodic side ...
A method to create an array of sub-5 nm nanogaps with self-aligned holes in a protective polymer overlayer is presented. The parallel formation of the nanogaps, intended for electrical sensing of biomolecules in an aqueous environment, is achieved by elect ...
This thesis explores transport phenomena in nanochannels on a chip. Fundamental nanofluidic ionic studies form the basis for novel separation and preconcentration applications for proteomic purposes. The measurements were performed with 50-nm-high 1D nanoc ...
The E-J power law as electric characterization of the HTS material in Finite Element computations has shown good agreement with measurements of field-dependent crtical current density and losses due to transport current. We use this technique to investigat ...
Spark-assisted chemical engraving (SACE) is a promising micro-machining technology for the low-cost machining of holes and channels in non-conducting materials, such as glass and some ceramics. Despite the complexity of SACE due to the interdependency of t ...
The locally-resolved degradation behavior was studied during 1900 hours in an SOFC repeat-element. In-situ measurements of local electrochemical performance were made on 18 locations over a segmented anode-supported cell. The evolution of local current den ...