Recovery of Cu, Pb, Cd and Zn from synthetic mixture by selective electrodeposition in chloride solution
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This thesis focuses on Cr-poisoning in solid oxide fuel cells (SOFC), which currently presents a key challenge for the development of this technology. By the implementation of dedicated experimental tools, this work offers a new access to, and comprehensio ...
Many efforts have been undertaken in past decades to minimize pollution from municipal solid waste incineration fly ash (MSWI FA). This residue is toxic, because of its high concentration of heavy metals, mainly Pb and Zn. A new method for heavy metals ent ...
We present a new type of metallic cathode, reaching quantum efficiency of 10(3). This value together with the estimated emittance, gives a brilliance of 2.8x10(13) A/m(2), making this cathode an excellent candidate for an ultrashort electron source. (C) 20 ...
Miniaturized, low temperature Solid Oxide Fuel Cells (SOFCs) that operate below 600 °C are promising for supplying electrical power to portable devices. Thin electrolyte membranes of less than one micrometer thickness have been shown to yield reasonable po ...
This thesis focuses on the degradation pathways occurring in composite solid oxide fuel cell (SOFC) cathodes based on lanthanum-strontium manganite (LSM), combining modeling at the electrode level with experimental data. LSM composite electrodes are one of ...
In order to track single superparamagnetic microbeads serving as markers in biomolecular assays, high-sensitivity, sub-micron magnetic sensors which can be integrated onto Lab-on-a-chip platforms are needed. This thesis studies the realization and characte ...
Iridium dioxide electrodes form part of the dimensionally stable anodes (DSA®) and this electrode material is widely used in many industrial processes namely water electrolysis, metal electro-winning, cathodic protection and electro-organic synthesis due t ...
Multi-walled carbon nanotubes and graphene nanoflowers were grown by a catalytic chemical vapor deposition process on metal surfaces. Electrodeposition was used as a versatile technique to obtain three different iron catalyst coatings on platinum microelec ...
It has been already proved that electrical capacitance increases at the electrode surface due to binding of highly charged antigens on the biointerface. In this paper, this capacitance change was used to demonstrate a novel detection for cardiac troponin I ...
Focused Electron Beam Induced Processing (FEBIP) is a technique used for etching and deposition of micro- and nano-structures using a focused electron beam. FEBIP is commonly carried out in a Scanning Electron Microscope (SEM) with a Gas Injection System ( ...
