Electrochemical oxidation of p-chlorophenol on SnO2-Sb2O5 based anodes for wastewater treatment
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Iridium dioxide electrodes form part of the dimensionally stable anodes (DSA®) and this electrode material is widely used in many industrial processes namely water electrolysis, metal electro-winning, cathodic protection and electro-organic synthesis due t ...
The electrochemical oxidation of ammonia was investigated on a Ni/Ni(OH)(2) electrode prepared by potential cycling of a Ni electrode in 1 M NaClO4. It was found that oxidation of ammonia is strongly pH dependent and proceeds mainly at pH values above 7. T ...
This work presents an investigation of the tribocorrosion of ruthenium in sulphuric acid solutions. The study was focused on the effect of the electrode potential on wear of ruthenium during sliding against an inert alumina ball in a reciprocating sliding ...
The chemical-mechanical polishing process (CMP) is an essential part of the production of integrated circuits. Metal to be polished in the CMP reacts with the oxidants from the aqueous suspension (slurry) and the passive film is formed on the metal surface ...
The electrochemical oxidation of 3,4-(methylenedioxy)phenylmethanol (piperonyl alcohol) was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Two electrochemical oxidation signals were found for piperonyl alcohol. T ...
The tribocorrosion behavior of tungsten sliding against an alumina ball was evaluated in sulfuric acid under applied electrode potential. Surface chemistry of worn and unworn surfaces was evaluated using XPS and AES. Quasi-potentiostatic polarization curve ...
As conventional fabrication techniques reach their limits novel techniques are needed for fabrication of structures in the nanometer range. This thesis investigates new methods to create metal nanostructures or nanoparticles with an STM tip or a sharp meta ...
A minidevice for performing gel-free proteome prefractionation via conventional IEF in soluble carrier ampholyte buffers is reported here. It consists of a compact block of poly-oxymethylene in which eight samples and two electrode chambers are machined. E ...
Real-time X-ray microscopy was used to study the influence of hydrogen-bubble formation on the morphology of ramified zinc electrodeposit. The experimental results show that when intense hydrogen bubbling occurs at high potential, the morphology of the ram ...
On-column conductivity detection in capillary-chip electrophoresis was achieved by actively coupling the high electric field with two sensing electrodes connected to the main capillary channel through two side detection channels. The principle of this conc ...
