Publication
Pt-based metallizations using different adhesion layers (Ti. Zr and Ta) were studied for use as electrodes for Ferroelectric thin films on oxidized silicon substrates. Different ways of oxidizing the adhesion layers prior to ferroelectric film growth are compared. with regard to obtaining stable. adherent Pt films of well-defined (111) orientation, while avoiding lead diffusion through the electrode. Upon in-situ deposition of PbTiO3 nt high excess lead flux. lead diffusion through the Pt film was found to depend strongly on the adhesion layer and the stabilization treatment. Pre-oxidation reduces leed diffusion during the later processing Ti diffuses through the electrode upon oxidation. whereas Ta and Zr stay in piece, in analogy to the diffusivities in the corresponding oxides. A novel oxidation treatment was developed to produce stable. adherent metallizations with controlled orientation and good barrier properties against lead diffusion.