Structure And Room-Temperature Deformation Of Alumina Fiber-Reinforced Aluminum
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This work reports on the microstructure and mechanical properties of porous silver films produced with different sintering parameters. The microstructure is investigated by high-resolution ptychographic Xray computed tomography and scanning electron micros ...
Strain Hardening Ultra High Performance Fibre Reinforced Concrete (SH-UHPFRC), has a high tensile strength (over 10 MPa) and exhibit significant strain hardening (several ‰) under tensile loads. These appealing features make it a suitable material for impr ...
The ductility and time-dependent recovery of a ductile acrylic adhesive were investigated in this work. The quasi-static true tensile and compressive strain behaviors were examined at different strain rates, taking large deformations into account. Yield st ...
In this article, the hot deformation mechanism of a laser-welded near a TA15 Ti-alloy joint was studied by hot tensile tests conducted at temperatures ranging from 800 degrees C to 900 degrees C with strain rates ranging from 1.0 x 10(-1) s(-1) to 1.0 x 10 ...
This paper investigates experimentally and numerically the biaxial flexural behaviour of thin circular slab specimens made of Ultra High Performance Fibre Reinforced Cementitious Composite (UHPFRC). The circular slab specimens represent an external tensile ...
H-SA700 is a type of new ultra-high-strength structural steel that is more environmentally friendly and more suitable for mass production than conventional high-strength steel. The objective of this paper is to contribute to the practical application of CF ...
International Association of Earthquake Engineering2017
To investigate the effect of recrystallization on hot deformation mechanism of TA15 titanium alloy, rolled sheet and laser-welded tubes before and after recrystallization annealing were tested by uniaxial tensile tests and biaxial gas bulging respectively. ...
Permanent post-tensioned ground anchors are widely used for the stabilization of different structures in civil engineering. Carbon fiber-reinforced polymer (CFRP) tendons have been proposed to replace steel tendons in ground anchors to solve the durability ...
The studies presented in this thesis aim to extend the current knowledge and understanding of the mechanical behavior of nanocrystalline materials with respect to temperature- and time dependence. Free standing electrodeposited nanocrystalline nickel speci ...
One of the most important characteristics of load-bearing structures is ductility, i.e. the ability of a material or a structure to sustain inelastic deformation prior to failure, without loss of resistance. The topic of this PhD Thesis was to develop duct ...
