Dynamic Frequency and Voltage Control for a Multiple Clock Domain Microarchitecture

We describe the design, analysis, and performance of an on-line algorithm to dynamically control the frequency/voltage of a Multiple Clock Domain (MCD) microarchitecture. The MCD microarchitecture allows the frequency/voltage of micrprocessor regions to be adjusted independently and dynamically, allowing enery savings when the frequency of some regions can be reduced without significantly impacting performance. Our algorithm achieves on average a 19.0% reduction in Energy Per Instriction (EPI), a 3.2% increase in Cycles Per Instruction (CPI), a 16.7% improvement in Energy–Delay Product, and a Power Savings to Performance Degradation ratio of 4.6. Traditional frequency/voltage scaling techniques which apply reductions globally to a fully synchronous processor achieve a Power Savings to Performance Degradation ratio of only 2–3. Our Energy–Delay Product improvement is 85.5% of what has been achieved using an off–line algorithm. These results were achieved using a broad range of applications from the MediaBench, Olden, and Spec2000 benchmark suites using an algorithm we show to require minimal hardware resources.