Publication

Evaluation of a New Process for the Additive Manufacturing of Metal Antennas

Publications associées (30)

Biobased Composites from Eugenol- and Coumarin-Derived Methacrylic Latex and Hemp Nanocellulose: Cross-Linking via [2+2] Photocycloaddition and Barrier Properties

A novel-biobased latex was synthesized by redox-initiated emulsion copolymerization of ethoxy dihydroeugenyl methacrylate with 5 wt % of a photosensitive methacrylate containing a coumarin group. A stable copolymer latex having 16 wt % solids content and a ...

Amer Chemical Soc2024

Small antennas with broad beamwidth integrated on a drone enclosed in a protective structure

Anja Skrivervik, Ismael Vico Triviño

In this paper, we analyze the integration of small antennas in a drone protected by a conductive structure. They must be light and resistant to provide high collision resilience, which is critical for drones flown indoors and in complex environments. To ac ...

IEEE2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Circularly polarized planar antenna with axially symmetric beamwidth reconfigurability

Anja Skrivervik, Ismael Vico Triviño, Hannes Bartle

This contribution presents the design of a compact circularly polarized antenna featuring beamwidth reconfiguration in both the horizontal and vertical planes. The observed radiation patterns in each of the reconfigurable states present axial symmetry and ...

IEEE2023

Analytic Approximation of In-Body Path Loss for Implanted Antennas

Anja Skrivervik, Mingxiang Gao, Zvonimir Sipus

Implantable bioelectronic devices predominantly use wireless links for communication and/or power transfer. When considering transmitting implanted antennas, electromagnetic radiation through biological media is highly attenuated, and previous work has sho ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Q-Factor Bounds for Microstrip Patch Antennas

Anja Skrivervik

Antenna bounds are a useful tool in assessing the feasibility or performance of an antenna design. Microstrip patch antennas are often limited by their relatively narrow bandwidth, and therefore Q-factor is an important design parameter, as it is related t ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023