Publications associées à Coating fragmentation by branching cracks at large biaxial strain

Optimizing Atomic Layer Deposition Processes with Nanowire-Assisted TEM Analysis

Atomic layer deposition (ALD) is one of the premier methods to synthesize ultra-thin materials on complex surfaces. The technique allows for precise control of the thickness down to single atomic layers, while at the same time providing uniform coverage ev ...

Wiley2024

Colloidal Atomic Layer Deposition on Nanocrystals Using Ligand-Modified Precursors

Raffaella Buonsanti, Anna Loiudice, Krishna Kumar, Petru Pasquale Albertini, Coline Marie Agathe Boulanger, Jari Leemans, Ona Segura Lecina, Mark Adrian Newton, Philippe Benjamin Green

Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxi ...

Amer Chemical Soc2024

Plasma-Assisted Hybrid Vapour Deposition Technology for Thin Film Fabrication

Caroline Hain

Continuous development of thin film deposition technologies is essential for the fabrication of films that meet the specific requirements of their target applications and working conditions. Therefore, it is necessary to increase the number of accessible a ...

EPFL2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Synthesis of metal oxide-overcoated carbon materials by liquid phase ALD and their applications in catalysis

Farzaneh Talebkeikhah

Coating nano particles and other substrates for efficiency enhancement, protection and obtaining new atomic structures is a widespread research topic in catalysis and material synthesis. Thus far, different approaches of coating, ranging from simplest to s ...

EPFL2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Transparent Porous Conductive Substrates for Gas-Phase Photoelectrochemical Hydrogen Production

Kevin Sivula, Jun Ho Yum, Marina Caroline Michèle Caretti, Benjamin Goldman, Rebekah Anne Wells, Simon Nussbaum, Emeline Cécile Rideau, Loï Charles Carbone, Elizaveta Potapova Mensi, Linda Lazouni

Gas diffusion electrodes are essential components of common fuel and electrolysis cells but are typically made from graphitic carbon or metallic materials, which do not allow light transmittance and thus limit the development of gas-phase based photoelectr ...

Wiley-V C H Verlag Gmbh2023

Structural and photophysical investigation of single-source evaporation of CsFAPbI(3) and FAPbI(3) perovskite thin films

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Albertus Adrian Sutanto, Nadja Isabelle Desiree Klipfel, Maria Cristina Momblona Rincón

Thermal vacuum deposition is a stimulating technique for upscaling perovskite solar cells. However, the operational complexity of multisource vapor deposition (MSVD) and achieving stoichiometric perovskite layers may impede its implementation. The single-s ...

Royal Society of Chemistry2022

Solar reduction of carbon dioxide on copper-tin electrocatalysts with energy conversion efficiency near 20%

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jing Gao, Meng Xia, Yuhang Liu, Dan Ren, Jun Li

Solar-driven carbon dioxide reduction has witnessed a renaissance in the past decades, but the system suffers from low reaction rates. Here the authors develop a copper/tin-oxide electrocatalyst, achieving a new benchmark solar-to-CO energy conversion effi ...

Nature Portfolio2022

Molybdenum disulphide nanoporous membranes as nanofluidic platforms - large-area engineering and study

Michal Daniel Macha

The work demonstrated in this thesis represent the path towards developing the large-scale fabrication of two-dimensional nanoporous membrane devices and use thereof as platforms to study nanoscale physics of water and ion flow through confined channels. M ...

EPFL2022