Effect of service temperature on the shear creep response of rigid polyurethane foam used in composite sandwich floor panels

This paper presents an experimental and analytical study about the effect of temperature on the shear creep response of a rigid polyurethane (PUR) foam within the scope of sandwich panel application in building floors. Shear creep tests were carried out on a foam (87.4 kg/m(3)) subjected to shear stress levels of 11%, 22% and 44% of its shear strength at temperatures of 20 degrees C, 24 degrees C and 28 degrees C - a range likely to be found in the envisaged application - for more than 1300 h. The results obtained show that the foam's creep response increases with both stress level and temperature. Findley's power law, extended to include Arrhenius equations describing the temperature dependency of its viscoelastic parameters, was fitted to the experimental creep curves, thus allowing to model the time-temperature-stress dependent shear creep behaviour of the PUR foam. The proposed model provided a good fit to the experimental creep curves within the linear viscoelastic range. Practical design equations were also derived for the time-temperature dependent (i) shear modulus, (ii) creep coefficient, and (iii) shear modulus reduction factor. Finally, the time-temperature-stress superposition principle (TI'SSP) and the time-stress superposition principle (TSSP) were used to yield "master curves" that compared well with the proposed model's predictions. (C) 2016 Elsevier Ltd. All rights reserved.