Publication
The effect of a series of triarylamine based D-pi-A organic dyes, namely RK1, BA504, BA741 and the simple L1 reference dye on solid-state dye sensitized solar cells (s-DSSCs) performances was studied. The solid hole transporting material (HTM) was obtained by in-situ photoelectrochemical polymerization (in-situ PEP) process applied in two different media (water and acetonitrile) to produce the poly-3,4 ethylenedioxythiophene (PEDOT) conducting polymer (CP). A joint experimental and theoretical (density functional theory and time-dependent density functional theory) study is conducted to correlate the dye molecular structure containing different donor, pi-bridge or acceptor with several physicochemical characteristics such as optical (absorption and emission), electronic and redox properties of dyes in organic and aqueous medium; in-situ PEP process and charge transfer kinetics at the DSSC interfaces (Dye/TiO2 and Dye/HTM) through the alignment of the different energy levels of the dyes and electrodes. These properties are considered since they govern the performance of s-DSSCs denoted by the short-circuit current (J(sc)), open circuit cell potential (V-oc) and fill factor (FF). Among the four studied dyes, the s-DSSCs based on RK1, shows the best power conversion efficiency of 1.75% resulting from highest FF (0.57), V-oc (550 mV) and J(sc) (5.6 mA/cm(2)). The large differences in experimental photovoltaic performances of the obtained s-DSSCs have been well outlined and provide the guidelines for future development of more efficient solar-cell sensitizers.