Ce cours constitue la seconde partie d'un enseignement consacré aux bases théoriques et pratiques des systèmes d’information géographique. Il propose une introduction aux systèmes d’information géographique qui ne requiert pas de connaissances préalables en informatique. Il donne la possibilité d’acquérir rapidement les notions de base qui vous permettent de créer des bases de données spatiales et de fabriquer des cartes géographiques. Il s’agit d’un cours pratique qui repose sur l’utilisation de logiciels libres, notamment QGIS.

Geographic clusters of objectively measured physical activity and the characteristics of their built environment in a Swiss urban area

Stéphane Joost, Idris Guessous, Marco André Vieira Ruas, Cédric Gubelmann

Introduction Evidence suggests that the built environment can influence the intensity of physical activity. However, despite the importance of the geographic context, most of the studies do not consider the spatial framework of this association. We aimed to assess individual spatial dependence of objectively measured moderate and vigorous physical activity (MVPA) and describe the characteristics of the built environment among spatial clusters of MVPA. Methods Cross-sectional data from the second follow-up (2014-2017) of CoLaus vertical bar PsyCoLaus, a longitudinal population-based study of the Lausanne area (Switzerland), was used to objectively measure MVPA using accelerometers. Local Moran's I was used to assess the spatial dependence of MVPA and detect geographic clusters of low and high MVPA. Additionally, the characteristics of the built environment observed in the clusters based on raw MVPA and MVPA adjusted for socioeconomic and demographic factors were compared. Results Data from 1,889 participants (median age 63, 55% women) were used. The geographic distribution of MVPA and the characteristics of the built environment among clusters were similar for raw and adjusted MVPA. In the adjusted model, we found a low concentration of individuals within spatial clusters of high MVPA (median: 38.5mins; 3% of the studied population) and low MVPA (median: 10.9 mins; 2% of the studied population). Yet, clear differences were found in both models between clusters regarding the built environment; high MVPA clusters were located in areas where specific compositions of the built environment favor physical activity. Conclusions Our results suggest the built environment may influence local spatial patterns of MVPA independently of socioeconomic and demographic factors. Interventions in the built environment should be considered to promote physically active behaviors in urban areas.

PUBLIC LIBRARY SCIENCE2022

Environmental policies: designing acceptable road pricing and voluntary waste sorting schemes

Linda Melina Tesauro

Growing urban population implies many challenges for the municipalities in terms of mobility, housing, waste management or infrastructures. Public policies are thus needed to ensure a sustainable development. The main objective of this thesis is to analyze different environmental policies in the domain of mobility and waste management in order to help municipalities in designing more efficient measures.Firstly, Chapter 2 focuses on traffic congestion and in particular the acceptability of a congestion charge. We design a large survey with different plausible schemes for the Canton of Geneva, Switzerland and assess their acceptability with a discrete choice experiment (DCE). Results show that public support depends crucially on the policy design and the information provided. We find an important demand for exemptions and a preference for constant pricing. This implies a clear trade-off between efficiency and acceptability. However, the gap can be partly closed by information provision. Analyzing heterogeneity, we observe that preferences vary according to personal characteristics, especially where people live and how they commute.Chapter 3 analyzes the determinants of households' municipal waste sorting. We design a survey to investigate households' sorting motivation and use a DCE to assess households' waste sorting scheme preferences in the Canton of Geneva. We observe that households' waste sorting depends on personal characteristics such as sensitivity to the environment, guilty conscience or information level. However, it is the satisfaction with the existing sorting scheme that increases most the probability to sort waste. Our results show clear preferences for better infrastructures, but with thresholds. Interestingly, the best infrastructures and services are not always needed. By looking at heterogeneity and linking personal beliefs and characteristics with preferences, we find different groups sorting a similar number of categories, but with different underlying mechanisms like a lack of knowledge or a need for more convenient infrastructures and services.To complement our analysis on voluntary policies and in particular on the effectiveness of convenient infrastructures, Chapter 4 assesses a new voluntary environmental policy implemented in the Canton of Geneva and compares the results with a bag tax, a monetary incentive policy introduced in the neighboring canton, Vaud. The voluntary policy consists of the distribution to households of specific bins for organic waste to increase the sorting rate and decrease the amount of unsorted waste. We use a difference-in-differences methodology to assess the causal impact of the policy on organic waste as well as on overall waste generation. We find that the introduction of the voluntary policy increases significantly the proportion of households sorting organic waste. Interestingly, we observe some positive spillover effects on other waste sorted. By comparing the voluntary policy in the Canton of Geneva and the bag tax in the Canton of Vaud, we find similar effects on organic waste sorting. However, the impact of the voluntary policy is smaller on unsorted waste than the short-term effect of the bag tax.In conclusion, we show that price is not the only factor to consider in environmental policies. More stringent policies can be acceptable if well designed. Furthermore, the power of non-monetary incentives should not be underestimated.

EPFL2022

Quantum-based approach for laboratory risk assessment and decision-making

Ruoxing Liao

With the rising focus on academic safety, there has been an effort to improve the academic safety climate and develop lab-specific risk assessment tools. Despite the progress made in recent years, there is still a deficit of reliable data statistics on safety events and risk assessment in academia, making it difficult to perform full-scale analysis. Moreover, the rapid turnover of personnel and the highly dynamic research tasks in a laboratory environment impede the implementation of classical and well-established risk management strategies, which are usually time-consuming and resource-intensive. Laboratory safety management is always challenging due to lack of data and effective methods. The end of safety management is usually the selection of risk mitigation measures. In the laboratory risk management process, decisions are often made through discussion and compromise. In this regard, it would be beneficial to provide a tool that can support in resource allocation and prioritization of actions. The goal of this project is to develop a decision support tool to assist in the selection of optimal and appropriate preventive or corrective measures in the lab safety management process. The use of decision tools such as Multi-Criteria Decision Making (MCDM) can effectively abstract complex laboratory management problems into a decision framework. This study focuses on the ranking process of competitive corrective measures. Combining the results of interviews and questionnaires, five evaluation criteria were proposed for the normative process of multi-criteria decision making. They are: Residual Risk, Risk reduction, Personnel reliability, Technical reliability, and Cost. classical methods TOPSIS and WSM have been evaluated during the study, and emerging quantum decision making methods have been explored. All three methods are used to simulate the laboratory safety decision making process, and they all present good consistency. Different weighting methods have also been applied to the model and two case studies have been conducted. The first case study is designed to construct the model and verify its feasibility, and the second model is used to investigate the process of group decision making. By applying different MCDM methods, the obtained results are discussed and compared to verify the stability and accuracy of the model. The approach proposed in this research is a promising tool. It offers the possibility to be compatible with different MCDM methods and risk assessment methods, and the proposed decision model could be used as a decision support system to help lab managers make better decisions, or it can provide a neutral point of view as an aid. Future work may include fine-tuning the model. In the following stage, decision criteria should be precisely defined, and corresponding quantitative formulas should be proposed to serve the flexible and dynamic laboratory environment.

2022

Quantum-based approach for laboratory risk assessment and decision-making

Ruoxing Liao

2022

Environmental policies: designing acceptable road pricing and voluntary waste sorting schemes

Linda Melina Tesauro

EPFL2022

Geographic clusters of objectively measured physical activity and the characteristics of their built environment in a Swiss urban area

Stéphane Joost, Idris Guessous, Marco André Vieira Ruas, Cédric Gubelmann

PUBLIC LIBRARY SCIENCE2022

Introduction to Geographic Information Systems (part 2)

Geographic clusters of objectively measured physical activity and the characteristics of their built environment in a Swiss urban area

Environmental policies: designing acceptable road pricing and voluntary waste sorting schemes

Quantum-based approach for laboratory risk assessment and decision-making

Quantum-based approach for laboratory risk assessment and decision-making

Environmental policies: designing acceptable road pricing and voluntary waste sorting schemes

Geographic clusters of objectively measured physical activity and the characteristics of their built environment in a Swiss urban area