Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.
This paper explores the system of laminated annealed glass beams post-tensioned through stainless steel tendons bonded to the lower glass edge. The tendons are first pre-tensioned and then adhesively bonded to the glass. The compressive pre-stress applied by the tendon increases the fracture strength of the beam; in case of glass fracture, the steel tendon provides ductility enhancing the post-fracture behaviour of the beam. In order to explore the optimal adhesive properties for such application, three types of structural adhesives were selected and applied in a post-tensioned glass beam system. The selected adhesives cover a range of stiffness from semi-rigid to rigid. Simple laminated glass beams were post-tensioned with a 15 kN force applied through the tendons and subsequently tested in four-point bending. The results show a structural response strongly dependent on the properties of the adhesive. While the application of pre-tension through stiffer adhesives significantly increased the initial fracture strength of the beams, an immediate loss of pre-stress was observed with the most flexible adhesive. Nevertheless, all the beams showed, to a varying extent, ductile postfracture behaviour and reached ultimate failure loads above the initial fracture load.
Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac
Véronique Michaud, Anastasios Vassilopoulos, Jialiang Fan