Publication

Ultrafast spectroscopy of wide bandgap semiconductor nanostructures

Mehran Shahmohammadi
2015
EPFL thesis
Abstract

Group III-nitrides have been considered a promising choice for the realization of optoelectronic devices since 1970. Since the first demonstration of the high-brightness blue light-emitting diodes (LEDs) by Shuji Nakamura and coworkers, the fabrication of highly efficient white LEDs has passed successful developments. A serious physical issue still remained, which prevents their use for high power and highly efficient LEDs: the drop of external quantum efficiency (EQE) of III-nitride LEDs when increasing the driving current, the so-called ''efficiency droop'' problem. In order to have a fast expansion to the lighting market, the cost-per-lumen of packaged LEDs must rapidly decrease. This indeed demands for having LED chips operating with high EQE under the high current operation. Besides the industrial interest of III-nitrides, owing to their large direct bandgap, they feature some interesting optical properties such as large exciton binding energy and large oscillator strength of excitons. However, when the carrier density raised in a semiconductor, a transition should occur from an insulating state consisting of a gas of excitons to a conductive electron-hole plasma, that is called the Mott transition. This crossover can drastically affect the optical and electrical characteristics of semiconductors and may, for instance, drive the transition from a polariton laser to a vertical cavity surface-emitting laser. More interestingly, even if biexcitons are frequently seen to dominate the emission of III-nitride heterostructures when the density is raised, no clear experimental report is available on the role of biexcitons in the Mott transition in a two-dimensional (2D) nanostructure. In the first part, the emission properties of high-quality GaN/AlGaN single quantum wells (QWs) at high-carrier densities are examined. They are of crucial importance to provide a deeper insight into the operating conditions of III-nitride based lasers and LEDs, as well as the transition from strong to weak coupling regime of exciton-polaritons in semiconductor microcavities. Employing the same technique then to investigate some InGaN/GaN QWs, the droop signature was investigated comprehensively in both polar and non-polar QWs. Having an accurate estimation of the carrier density in the QWs, the contribution of several non-radiative processes were quantitatively examined. These experiments can indeed provide a deeper insight on the physical phenomena responsible for the efficiency droop in III-nitride LEDs, and can stimulate several theoretical and experimental on this subject. The second part focuses on the transport mechanisms of excitons in ZnO and III-nitride based nano-structures. The transverse movement of donor-bound excitons in a purely bent ZnO microwire as a function of temperature have been investigated, owing to the high spatial, spectral and temporal resolutions of our original time resolved cathodoluminescence system. The movement mechanism was modeled by a hopping process of excitons. Our results pave the way to new experiments allowing to reveal the physics at play at the nanoscale in different materials. However, in case of highly disordered systems, one should take into account more complex considerations, as in the case of InGaN core-shell QW structures studied in the last chapter, the large energy fluctuations prevent excitons to move along the energy gradient at low temperatures.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (33)
Light-emitting diode
A light-emitting diode (LED) is a semiconductor device that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The color of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the band gap of the semiconductor. White light is obtained by using multiple semiconductors or a layer of light-emitting phosphor on the semiconductor device.
Gallium nitride
Gallium nitride () is a binary III/V direct bandgap semiconductor commonly used in blue light-emitting diodes since the 1990s. The compound is a very hard material that has a Wurtzite crystal structure. Its wide band gap of 3.4 eV affords it special properties for applications in optoelectronic, high-power and high-frequency devices. For example, GaN is the substrate which makes violet (405 nm) laser diodes possible, without requiring nonlinear optical frequency-doubling.
Wide-bandgap semiconductor
Wide-bandgap semiconductors (also known as WBG semiconductors or WBGSs) are semiconductor materials which have a larger band gap than conventional semiconductors. Conventional semiconductors like silicon have a bandgap in the range of 0.6 – 1.5 electronvolt (eV), whereas wide-bandgap materials have bandgaps in the range above 2 eV. Generally, wide-bandgap semiconductors have electronic properties which fall in between those of conventional semiconductors and insulators.
Show more
Related publications (155)

III-N blue-emitting epi-structures with high densities of dislocations: Fundamental mechanisms for efficiency improvement and applications

Pierre Christophe Lottigier

Since the dawn of humanity, human beings seeked to light their surroundings for their well-being, security and development. The efficiency of ancient lighting devices, e.g. oil lamps or candles, was in the order of 0.03-0.04% and jumped to 0.4-0.6% with th ...
EPFL2024

Study of growth-induced point defects and their impact on InGaN-based optoelectronic devices

Yao Chen

GaN exhibits a decomposition tendency for temperatures far below its melting point and common growth temperatures used in metal-organic vapour phase epitaxy (MOVPE).This characteristic is known to be a major obstacle for realising GaN bulk substrate. There ...
EPFL2024

Investigation of room-temperature single-photon emitters in GaN-based materials and GaN/AlN quantum dots

Johann Nicolaï Stachurski

Over the past decade, quantum photonics platforms aiming at harnessing the fundamental properties of single particles, such as quantum superposition and quantum entanglement, have flourished. In this context, single-photon emitters capable of operating at ...
EPFL2024
Show more
Related MOOCs (6)
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Applications
Learn about plasma applications from nuclear fusion powering the sun, to making integrated circuits, to generating electricity.
Show more