Publication

The thermodynamics of devices with solid layered-bed magnetocaloric refrigerants

Abstract

In conventional refrigeration the use of the T S diagram to determine thermodynamic cycle performance is a well accepted tool. This method is based on a single state description of the gaseous refrigerant during its cycling. Devices filled with a magnetocaloric refrigerant, due to slow diffusion and inhomogeneous temperature distributions, usually do not allow such a simple description. If the layered bed technique is applied, the situation is even more complex. The related problems are addressed and some new solutions are presented, e.g. a generalized T*-S* diagram containing weights w*. Furthermore, an analysis shows that an implementation of a layered bed of numerous weak magnetocaloric alloys does not substantially decrease the coefficient of performance, COP, compared to a single correspondingly better performing magnetocaloric material, but leads to an increase of the magnet size, the volume and the related price of a device. With devices operating with higher frequencies this can be counterbalanced and magnetic heating, refrigeration and energy conversion - with present available magnetocaloric materials - suddenly show a realistic chance for certain market penetrations. (c) 2012 Elsevier Ltd and IIR. All rights reserved.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (34)
Magnetic refrigeration
Magnetic refrigeration is a cooling technology based on the magnetocaloric effect. This technique can be used to attain extremely low temperatures, as well as the ranges used in common refrigerators. A magnetocaloric material warms up when a magnetic field is applied. The warming is due to changes in the internal state of the material releasing heat. When the magnetic field is removed, the material returns to its original state, reabsorbing the heat, and returning to original temperature.
Refrigerator
A refrigerator, colloquially fridge, is a commercial and home appliance consisting of a thermally insulated compartment and a heat pump (mechanical, electronic or chemical) that transfers heat from its inside to its external environment so that its inside is cooled to a temperature below the room temperature. Refrigeration is an essential food storage technique around the world. The lower temperature lowers the reproduction rate of bacteria, so the refrigerator reduces the rate of spoilage.
Refrigerant
A refrigerant is a working fluid used in the refrigeration cycle of air conditioning systems and heat pumps where in most cases they undergo a repeated phase transition from a liquid to a gas and back again. Refrigerants are heavily regulated due to their toxicity, flammability and the contribution of CFC and HCFC refrigerants to ozone depletion and that of HFC refrigerants to climate change. Refrigerants are used in a direct expansion (DX) system to transfer energy from one environment to another, typically from inside a building to outside (or vice versa) commonly known as an "air conditioner" or "heat pump".
Show more
Related publications (32)

EPFL's District Heating Heat Pump - Performance Analysis for DIfferent Working Fluids

Sylvain Clément

The present case study is multi-criteria performance analysis of EPFL’s heat pump for different working fluids. The heat pump is based on a 2-stage vapour compression cycle which is modelled using the software Belsim VALI for 7 low-GWP refrigerants. The si ...
2021

Small, High-Speed, Oil-Free Radial Turbo-compressors for Cooling Applications: Refrigerant Selection

Jürg Alexander Schiffmann

Emerging energy-efficient, oil-free radial centrifugal compressors seem promising for small to mid-capacity air conditioning and refrigeration applications. Compressor design must balance trade-offs among impeller diameter, bearing type, and refrigerant se ...
2018

High Temperature Heat Pumps: Market Overview, Stateof the Art, Research Status, Refrigerants, and Application Potentials

Jürg Alexander Schiffmann

This study reviews the current state of the art of high temperature heat pumps (HTHPs) with heat sink temperatures of 90 to 160°C. The focus is on the analysis of heat pump cycles, suitable refrigerants, and the operating ranges of commercially available H ...
2018
Show more
Related MOOCs (7)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Show more