Publication

VENTING OF TURBIDITY CURRENTS: WHEN TO ACT?

Sabine Chamoun
2017
Conference paper
Abstract

During floods, sediments are transported from watersheds into reservoirs, slowly decreasing water volumes and this leading to economic losses. Thus, in the long term, sedimentation endangers reservoirs’ sustainability. Sediments can also block low-level hydraulic structures such as bottom outlets and powerhouse intakes and cause abrasion of gates and turbines. Additionally, the trapped sediments induce downstream starvation and thus the impoverishment of the river’s morphology and ecosystem. Many measures are taken to deal with the sedimentation of reservoirs. Among the most common methods is venting turbidity currents approaching the dam. In fact, these sediment-laden currents carry the major part of sediments found near the dam and thus their evacuation before they settle can be a very effective method to reduce sedimentation. However, dam operators lack information and guidelines to perform efficient venting operations. The present research experimentally and numerically investigates the venting of turbidity currents applied with different timings of outlet opening: (1) before the current reaches the outlet, (2) after the current has reached the outlet and climbed up to the top of the dam, and (3) after the upstream reflection of the muddy lake has begun. The high data acquisition frequency offers the possibility to examine temporal variations of inflow and outflow concentrations and discharges and thus variations of the efficiency of venting in time during the tests. In addition, the experimental results are extended numerically for a better understanding of the effect of opening timing on venting. Results show that opening the outlet before the current reaches the wall can be more efficient than opening after the current has reached the wall. Outputs of this study lead to crucial information for dam operators dealing with reservoirs facing high sedimentation rates due to the formation of turbidity currents.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (32)
Turbidity current
A turbidity current is most typically an underwater current of usually rapidly moving, sediment-laden water moving down a slope; although current research (2018) indicates that water-saturated sediment may be the primary actor in the process. Turbidity currents can also occur in other fluids besides water. Researchers from the Monterey Bay Aquarium Research Institute found that a layer of water-saturated sediment moved rapidly over the seafloor and mobilized the upper few meters of the preexisting seafloor.
Marine sediment
Marine sediment, or ocean sediment, or seafloor sediment, are deposits of insoluble particles that have accumulated on the seafloor. These particles have their origins in soil and rocks and have been transported from the land to the sea, mainly by rivers but also by dust carried by wind and by the flow of glaciers into the sea. Additional deposits come from marine organisms and chemical precipitation in seawater, as well as from underwater volcanoes and meteorite debris.
Sediment
Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification.
Show more
Related publications (34)

Ultrasonic sediment flux profiling with ACVP Technology: application to sediment-laden Boundary Layer flows

Giovanni De Cesare, David Hurther

Sediment transport in geophysical boundary layer flows has relevance to a broad spectrum of sciences ranging from the physical and chemical, to the biological, ecological and geological. Advances in sediment transport modelling and prediction strongly suff ...
2023

Reduction of riverbed clogging related to sediment flushing

Giovanni De Cesare, Romain Maxime Dubuis

The ecological effects of dams on sediment and river flow have been subject to an increasing attention, leading to the implementation of mitigation measures such as environmental flow release and sediment replenishment. However, fine sediment dynamics have ...
CRC Press/Balkema2023
Show more
Related MOOCs (2)
Water quality and the biogeochemical engine
Learn about how the quality of water is a direct result of complex bio-geo-chemical interactions, and about how to use these processes to mitigate water quality issues.
Fluid Mechanics
Ce cours de base est composé des sept premiers modules communs à deux cours bachelor, donnés à l’EPFL en génie mécanique et génie civil.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.