Decreasing the Stability of Borohydride with Ionic Liquids for Hydrogen Storage and Carbon Dioxide Conversion

The world needs to move from a fossil fuel to a renewable energy based society. With the increasing electricity production from wind and PV, short and long term energy storage are becoming one of challenge of the 21st century. While batteries are the preferred method for short term storage, another technology is required for seasonal storage. Hydrogen is a valuable energy carrier owning its high energy density (122 kJ/g). However, compact and safe storage of H2 is challenging. The current solution is to compress hydrogen up to 700 bar for mobile application (fuel cell cars), and metal hydrides for stationary application. Material-based H2 storage avoids using high-pressure cylinder. Complex hydrides are especially attractive for solid-state H2 storage due to their high gravimetric and volumetric hydrogen density. Sodium borohydride (NaBH4) contains 10.6 mass% of H2, but high temperatures are needed to release H2 (505 °C) and the reaction is not reversible under moderate conditions. To apply complex hydrides in real applications, they must be modified to improve the kinetics and thermodynamics of H2 desorption. Several possibilities exist such as confinement into scaffolds, catalyst addition, or combination of several hydrides to modify the dehydrogenation pathway. The stability of complex hydrides is determined by the localization of the charge on the central atom of the complex. Therefore, in this thesis the interaction of highly polar or ionic compounds with complex hydrides were investigated. We combine NaBH4 with a special class of organic salts: ionic liquids (IL). Considering their chemical and thermal stability, IL are attractive additive. Using organic additives instead of expensive metal catalysts is another advantage. Two different techniques were employed to combine the IL and NaBH4. The first one consists of mechanochemically milling them to create an interaction between BH4- and IL. The second one is to directly synthesized IL borohydrides ([IL][BH4]) by metathesis reaction. Different ILs, such as vinylbenzyltrimethylammonium chloride ([VBTMA][Cl]), 1-butyl-3-methylimidazolium chloride ([bmim][Cl]), and 1-ethyl-1-methylpyrrolidinium bromide ([EMPY][Br]) were tested. [bmim][BH4] was able to release H2 below 100 °C. The hydrogen content ranges between 2.4 mass% and 2.9 mass%. The second challenge of this century is the CO2 problematic. Atmospheric CO2 concentration linearly increases, leading to greenhouse effect. Carbon capture and sequestration (CCS) and utilization (CCU) are primordial research topic to stabilize the CO2 emission. Hydrides are primary reducing agents, thus reduction of CO2 can be accomplished with them. Direct CO2 reduction at ambient conditions is challenging for classical borohydrides. With our [IL][BH4], gaseous CO2 can be captured and reduced under ambient conditions (1 bar, RT). Three CO2 bounds with boron to give triformatoborohydride ([HB(OCHO)3]–. Dilute CO2 (6 vol%) can be used as well. The reaction was followed in real time with a magnetic suspended balance (MSB). Further, CO2 reduction happened when air is used as a carbon dioxide source. Formic acid can be obtained by adding HCl. Thus, ionic liquid borohydrides have great potential as a CO2 absorber and reducer to alternative fuels. In short, we applied ionic liquid to destabilized borohydrides. The resulting materials exhibited potential for solid-state hydrogen storage, as well as CO2 capture and transformation.