Publication

Temperature‐dependent performance of silicon heterojunction solar cells with transition‐metal‐oxide‐based selective contacts

Abstract

The temperature coefficient (TC) is an essential figure of merit to accurately evaluate solar cell performance at various operating temperatures and hence enabling the comparison between different cell technologies. Recently, solar cells that use passivating contacts based on transition metal oxide (TMO) layers have attracted much attention due to their excellent performance. Therefore, knowledge of their TCs and insights into their performance at various operating temperatures are of significant interest. In this study, we investigate the temperature-dependent performance of solar cells with TMO-based passivating contacts at various illumination intensities. We then compare their performance to that of standard silicon heterojunction (SHJ) solar cells. The efficiency TC (TCη) of solar cells that use passivating contacts based on molybdenum oxide (MoOx) and titanium oxide (TiOx) films is found to be almost identical. Both outperform the TCη of the standard SHJ cells and are greatly superior to those of cell structures without passivating contacts. The superior TCη of the MoOx-based cells is mainly due to their favourable TCs of the short-circuit current density (TCJsc) and fill factor (TCFF), whereas the superiority of TCη of the TiOx-based cells is solely resulting from the superior TCFF. The favourable TCJsc of the MoOx-based cells is explained by an enhanced spectral response at short wavelengths with increasing temperature, due to the improvement of the passivation quality of the MoOx-based passivating contacts. The beneficial TCFF of both solar cells is partly resulting from the improvement of the contact resistivity of the TMO-based passivating contacts which counterbalances some of the fill factor losses at elevated temperatures. Although an improvement of the passivation quality of the TMO-based passivating contacts is observed at elevated temperature, it does not have a strong impact on the TC of the open-circuit voltage of the investigated solar cells. Furthermore, we also found that the studied cells are less sensitive to temperature variation at higher illumination intensities.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (32)
Solar cell
A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical phenomenon. It is a form of photoelectric cell, defined as a device whose electrical characteristics, such as current, voltage, or resistance, vary when exposed to light. Individual solar cell devices are often the electrical building blocks of photovoltaic modules, known colloquially as solar panels.
Organic solar cell
An organic solar cell (OSC) or plastic solar cell is a type of photovoltaic that uses organic electronics, a branch of electronics that deals with conductive organic polymers or small organic molecules, for light absorption and charge transport to produce electricity from sunlight by the photovoltaic effect. Most organic photovoltaic cells are polymer solar cells. The molecules used in organic solar cells are solution-processable at high throughput and are cheap, resulting in low production costs to fabricate a large volume.
Solar-cell efficiency
Solar-cell efficiency refers to the portion of energy in the form of sunlight that can be converted via photovoltaics into electricity by the solar cell. The efficiency of the solar cells used in a photovoltaic system, in combination with latitude and climate, determines the annual energy output of the system. For example, a solar panel with 20% efficiency and an area of 1 m2 will produce 200 kWh/yr at Standard Test Conditions if exposed to the Standard Test Condition solar irradiance value of 1000 W/m2 for 2.
Show more
Related publications (85)

A comprehensive physical model for the sensitivity of silicon heterojunction photovoltaic modules to water ingress

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Olatz Arriaga Arruti, Luca Gnocchi

Silicon heterojunction (SHJ)-solar modules-when encapsulated with ethylene vinyl acetate (EVA)-are known to be extremely sensitive to water ingress. The reason for this is, however, not clear. Here, we explain the root causes of this degradation mechanism ...
Cambridge2024

Charge Extraction and Recombination Dynamics of CdSe/CdTe Solar Cells Studied with Transient Photovoltage/Photocurrent Techniques

Mohammad Khaja Nazeeruddin, Iwan Zimmermann, Lei Chen

Significant advancements have been made in the development of high-performance cadmium telluride (CdTe)-based thin film solar cells. However, studies examining the transient excited-state charge dynamics, which determine the final steady-state device perfo ...
New York2023

Contact Design for Silicon Heterojunction Solar Cells

Luca Massimiliano Antognini

Today more than ever the world needs clean energy sources and thus a fast deployment and scaling up of the photovoltaic industry. In this context improving solar cell efficiency plays a major role. In order to achieve the maximum single junction efficiency ...
EPFL2022
Show more
Related MOOCs (5)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Micro and Nanofabrication (MEMS)
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Show more