Paper chromatography is an analytical method used to separate coloured chemicals or substances. It is now primarily used as a teaching tool, having been replaced in the laboratory by other chromatography methods such as thin-layer chromatography (TLC).
The setup has three components. The mobile phase is a solution that travels up the stationary phase, due to capillary action. The mobile phase is generally a mixture of non-polar organic solvent, while the stationary phase is polar inorganic solvent water. Here paper is used to support the stationary phase, water. Polar water molecules are held inside the void space of the cellulose network of the host paper. The difference between TLC and paper chromatography is that the stationary phase in TLC is a layer of adsorbent (usually silica gel, or aluminium oxide), and the stationary phase in paper chromatography is less absorbent paper.
A paper chromatography variant, two-dimensional chromatography, involves using two solvents and rotating the paper 90° in between. This is useful for separating complex mixtures of compounds having similar polarity, for example, amino acids.
The retention factor (Rƒ) may be defined as the ratio of the distance travelled by the solute to the distance travelled by the solvent. It is used in chromatography to quantify the amount of retardation of a sample in a stationary phase relative to a mobile phase. Rƒ values are usually expressed as a fraction of two decimal places.
If Rƒ value of a solution is zero, the solute remains in the stationary phase and thus it is immobile.
If Rƒ value = 1 then the solute has no affinity for the stationary phase and travels with the solvent front.
For example, if a compound travels 9.9 cm and the solvent front travels 12.7 cm, the Rƒ value = (9.9/12.7) = 0.779 or 0.78. Rƒ value depends on temperature and the solvent used in experiment, so several solvents offer several Rƒ values for the same mixture of compound. A solvent in chromatography is the liquid the paper is placed in, and the solute is the ink which is being separated.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
This course introduces the basic principles of bioprocess engineering and highlights the similarities and differences with chemical engineering. Without going into the fundamentals, it proposes an ove
This class adresses scaling laws in MEMS/NEMS. The dominant physical effects and scaling effects when downsizing sensors and actuators in microsystems are discussed, across a broad range of actuation
Thin-layer chromatography (TLC) is a chromatography technique that separates components in non-volatile mixtures. It is performed on a TLC plate made up of a non-reactive solid coated with a thin layer of adsorbent material. This is called the stationary phase. The sample is deposited on the plate, which is eluted with a solvent or solvent mixture known as the mobile phase (or eluent). This solvent then moves up the plate via capillary action.
High-performance liquid chromatography (HPLC), formerly referred to as high-pressure liquid chromatography, is a technique in analytical chemistry used to separate, identify, and quantify each component in a mixture. It relies on pumps to pass a pressurized liquid solvent containing the sample mixture through a column filled with a solid adsorbent material. Each component in the sample interacts slightly differently with the adsorbent material, causing different flow rates for the different components and leading to the separation of the components as they flow out of the column.
In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. The mixture is dissolved in a fluid solvent (gas or liquid) called the mobile phase, which carries it through a system (a column, a capillary tube, a plate, or a sheet) on which a material called the stationary phase is fixed. Because the different constituents of the mixture tend to have different affinities for the stationary phase and are retained for different lengths of time depending on their interactions with its surface sites, the constituents travel at different apparent velocities in the mobile fluid, causing them to separate.
Fluorescent solvatochromic dyes and molecular rotors have attracted considerable attention as fluorogenic probes because of background-free detection of biomolecules in live cells in no-wash conditions. Herein, we introduce a push-pull boron-containing (di ...
Royal Soc Chemistry2016
Mass spectrometry (MS) is an essential detection tool in bioanalytical chemistry owing to its exceptional selectivity and sensitivity, paired with rapid analyte identification and quantification. In this thesis, two classical MS and a newly developed ioniz ...
Two dinuclear homoleptic complexes of lanthanides(II) supported by the polydentate tris(tertbutoxy) siloxide ligand ([Yb2L4], 1-Yb and [Sm2L4], 1-Sm, (L = (OtBu)3SiO−)) were synthesized in 70–80% yield and 1-Sm was crystallographically characterized. 1-Yb ...