Charcoal is a lightweight black carbon residue produced by strongly heating wood (or other animal and plant materials) in minimal oxygen to remove all water and volatile constituents. In the traditional version of this pyrolysis process, called charcoal burning, often by forming a charcoal kiln, the heat is supplied by burning part of the starting material itself, with a limited supply of oxygen. The material can also be heated in a closed retort. Modern "charcoal" briquettes used for outdoor cooking may contain many other additives, e.g. coal.
This process happens naturally when combustion is incomplete, and is sometimes used in radiocarbon dating. It also happens inadvertently while burning wood, as in a fireplace or wood stove. The visible flame in these is due to combustion of the volatile gases exuded as the wood turns into charcoal. The soot and smoke commonly given off by wood fires result from incomplete combustion of those volatiles. Charcoal burns at a higher temperature than wood, with hardly a visible flame, and releases almost nothing except heat and carbon dioxide.
Charcoal burner
The production of wood charcoal in locations where there is an abundance of wood dates back to ancient times. It generally begins with piling billets of wood on their ends to form a conical pile. Openings are left at the bottom to admit air, with a central shaft serving as a flue. The whole pile is covered with turf or moistened clay. The firing is begun at the bottom of the flue, and gradually spreads outward and upward. The success of the operation depends upon the rate of the combustion. Under average conditions wood yields about 60% charcoal by volume, or 25% by weight; small-scale production methods often yield only about 50% by volume, while large-scale methods enabled higher yields of about 90% by the 17th century. The operation is so delicate that it was generally left to colliers (professional charcoal burners). They often lived alone in small huts to tend their wood piles.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
An ember, also called a hot coal, is a hot lump of smouldering solid fuel, typically glowing, composed of greatly heated wood, coal, or other carbon-based material. Embers (hot coals) can exist within, remain after, or sometimes precede, a fire. Embers are, in some cases, as hot as the fire which created them. They radiate a substantial amount of heat long after the fire has been extinguished, and if not taken care of properly can rekindle a fire that is thought to be completely extinguished and can pose a fire hazard.
In a chemistry laboratory, a retort is a device used for distillation or dry distillation of substances. It consists of a spherical vessel with a long downward-pointing neck. The liquid to be distilled is placed in the vessel and heated. The neck acts as a condenser, allowing the vapors to condense and flow along the neck to a collection vessel placed underneath. In the chemical industry, a retort is an airtight vessel in which substances are heated for a chemical reaction producing gaseous products to be collected in a collection vessel or for further processing.
A charcoal burner is someone whose occupation is to manufacture charcoal. Traditionally this is achieved by carbonising wood in a charcoal pile or kiln. Charcoal burning is one of the oldest human crafts. The knowledge gained from this industry still contributes to the solution of energy problems today. Due to its historical and cultural importance, charcoal burning and tar distilling were incorporated in December 2014 into the register of the Intangible Cultural Heritage in Germany by the Kultusministerkonferenz.
Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...
Due to the large waste of heat in the power and industrial sectors, our use of energy is inefficient. Moreover, it relies on rapidly depleting and greenhouse-gas-emitting sources such as fossil fuels. While the scarcity of energy resources is a relevant so ...
Currently, the Swiss timber industry in mountain areas largely exports unprocessed lumber and imports finished timber products due to the lack of digital tools. By using new digital design-to-production workflows, it is possible to investigate new building ...