Are you an EPFL student looking for a semester project?

Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.

Industrial and production engineering

Industrial and production engineering (IPE) is an interdisciplinary engineering discipline that includes manufacturing technology, engineering sciences, management science, and optimization of complex processes, systems, or organizations. It is concerned with the understanding and application of engineering procedures in manufacturing processes and production methods. Industrial engineering dates back all the way to the industrial revolution, initiated in 1700s by Sir Adam Smith, Henry Ford, Eli Whitney, Frank Gilbreth and Lilian Gilbreth, Henry Gantt, F.W. Taylor, etc. After the 1970s, industrial and production engineering developed worldwide and started to widely use automation and robotics. Industrial and production engineering includes three areas: Mechanical engineering (where the production engineering comes from), industrial engineering, and management science. The objective is to improve efficiency, drive up effectiveness of manufacturing, quality control, and to reduce cost while making their products more attractive and marketable. Industrial engineering is concerned with the development, improvement, and implementation of integrated systems of people, money, knowledge, information, equipment, energy, materials, as well as analysis and synthesis. The principles of IPE include mathematical, physical and social sciences and methods of engineering design to specify, predict, and evaluate the results to be obtained from the systems or processes currently in place or being developed. The target of production engineering is to complete the production process in the smoothest, most-judicious and most-economic way. Production engineering also overlaps substantially with manufacturing engineering and industrial engineering. The concept of production engineering is interchangeable with manufacturing engineering. As for education, undergraduates normally start off by taking courses such as physics, mathematics (calculus, linear analysis, differential equations), computer science, and chemistry.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related categories (394)

Related concepts (160)

Related courses (30)

Related lectures (172)

Related MOOCs (11)

Related people (89)

Related publications (240)

Related startups (8)

Related units (2)

Hydraulics

Hydraulics () is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is the liquid counterpart of pneumatics, which concerns gases. Fluid mechanics provides the theoretical foundation for hydraulics, which focuses on applied engineering using the properties of fluids. In its fluid power applications, hydraulics is used for the generation, control, and transmission of power by the use of pressurized liquids.

Machine tool

A machine tool is a machine for handling or machining metal or other rigid materials, usually by cutting, boring, grinding, shearing, or other forms of deformations. Machine tools employ some sort of tool that does the cutting or shaping. All machine tools have some means of constraining the workpiece and provide a guided movement of the parts of the machine. Thus, the relative movement between the workpiece and the cutting tool (which is called the toolpath) is controlled or constrained by the machine to at least some extent, rather than being entirely "offhand" or "freehand".

Electron-beam technology

Since the mid-20th century, electron-beam technology has provided the basis for a variety of novel and specialized applications in semiconductor manufacturing, microelectromechanical systems, nanoelectromechanical systems, and microscopy. Free electrons in a vacuum can be manipulated by electric and magnetic fields to form a fine beam. Where the beam collides with solid-state matter, electrons are converted into heat or kinetic energy. This concentration of energy in a small volume of matter can be precisely controlled electronically, which brings many advantages.

MSE-352: Introduction to microscopy + Laboratory work

Ce cours d'introduction à la microscopie a pour but de donner un apperçu des différentes techniques d'analyse de la microstructure et de la composition des matériaux, en particulier celles liées aux m

MICRO-301: Manufacturing technologies

This course gives an introduction to production methods and manufacturing technologies used in microengineering. The focus is given on the understanding of physical phenomena underlying the processes,

PHYS-405: Experimental methods in physics

The course's objectivs are: Learning several advenced methods in experimental physics, and critical reading of experimental papers.

Micro and Nanofabrication (MEMS)

Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.

Microstructure Fabrication Technologies I

Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.

Micro and Nanofabrication (MEMS)

Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.

Conventional Machining: Material Removal and Processes MICRO-301: Manufacturing technologies

Explores conventional machining processes, emphasizing the importance of precise part shapes and dimensional accuracy.

Electron Microscopy Components MSE-352: Introduction to microscopy + Laboratory work

Covers electron microscope components, vacuum systems, aberrations, detectors, and specimen holders.

Conventional Machining: Physics of Manufacturing MICRO-301: Manufacturing technologies

Explores conventional machining processes, tool wear, cutting temperature, chip formation, and machining economics.

Low-energy Electron Holography Microscope for Imaging of Single Molecules

Sven Alexander Szilagyi

Structure determination techniques are an essential tool to investigate and understand molecules, especially in biology, where functionality crucially depends on structure. The dominant high-resolutio

EPFL2022

Real space and reciprocal space investigations of the spin dynamics in skyrmion-hosting materials

Le Yu

Magnetic skyrmions are whirl-like spin configurations with particle-like properties protected by non-trivial topology. Due to their unique spin structures and dynamical properties, they have attracted

EPFL2022

Magnetic Properties of Surface Adsorbed Metal Adatoms and Dimers

Dante Philippe Sblendorio

This thesis investigates the magnetic properties of single atoms and dimers adsorbed on graphene and oxide decoupling layers supported by single crystal metal substrates, using scanning tunneling micr

EPFL2022

A drive shaft, driveshaft, driving shaft, tailshaft (Australian English), propeller shaft (prop shaft), or Cardan shaft (after Girolamo Cardano) is a component for transmitting mechanical power and torque and rotation, usually used to connect other components of a drivetrain that cannot be connected directly because of distance or the need to allow for relative movement between them. As torque carriers, drive shafts are subject to torsion and shear stress, equivalent to the difference between the input torque and the load.

G-code (also RS-274) is the most widely used computer numerical control (CNC) and 3D printing programming language. It is used mainly in computer-aided manufacturing to control automated machine tools, as well as for 3D-printer slicer applications. The G stands for geometry. G-code has many variants. G-code instructions are provided to a machine controller (industrial computer) that tells the motors where to move, how fast to move, and what path to follow.

A return period, also known as a recurrence interval or repeat interval, is an average time or an estimated average time between events such as earthquakes, floods, landslides, or river discharge flows to occur. It is a statistical measurement typically based on historic data over an extended period, and is used usually for risk analysis. Examples include deciding whether a project should be allowed to go forward in a zone of a certain risk or designing structures to withstand events with a certain return period.

Active in robotic solutions, nanometer scale and semiconductor industry. Imina Technologies Sàrl offers high-precision robotic solutions for interacting with and characterizing samples at the nanometer scale under light and electron microscopes, trusted by leading semiconductor companies and research institutes globally.

Active in machining, cnc programming and mechanical components. Specializing in 5-axis machining and CNC programming, PROGRAM SA excels in producing mechanical components for diverse industries with a focus on quality, innovation, and client relationships.

Active in neurovascular, medtech and minimally invasive. Artiria Medical revolutionizes minimally invasive stroke treatment with cutting-edge deflectable guidewire technology.