In aerospace engineering, mass ratio is a measure of the efficiency of a rocket. It describes how much more massive the vehicle is with propellant than without; that is, the ratio of the rocket's wet mass (vehicle plus contents plus propellant) to its dry mass (vehicle plus contents). A more efficient rocket design requires less propellant to achieve a given goal, and would therefore have a lower mass ratio; however, for any given efficiency a higher mass ratio typically permits the vehicle to achieve higher delta-v.
The mass ratio is a useful quantity for back-of-the-envelope rocketry calculations: it is an easy number to derive from either or from rocket and propellant mass, and therefore serves as a handy bridge between the two. It is also a useful for getting an impression of the size of a rocket: while two rockets with mass fractions of, say, 92% and 95% may appear similar, the corresponding mass ratios of 12.5 and 20 clearly indicate that the latter system requires much more propellant.
Typical multistage rockets have mass ratios in the range from 8 to 20. The Space Shuttle, for example, has a mass ratio around 16.
The definition arises naturally from Tsiolkovsky's rocket equation:
where
Δv is the desired change in the rocket's velocity
ve is the effective exhaust velocity (see specific impulse)
m0 is the initial mass (rocket plus contents plus propellant)
m1 is the final mass (rocket plus contents)
This equation can be rewritten in the following equivalent form:
The fraction on the left-hand side of this equation is the rocket's mass ratio by definition.
This equation indicates that a Δv of times the exhaust velocity requires a mass ratio of . For instance, for a vehicle to achieve a of 2.5 times its exhaust velocity would require a mass ratio of (approximately 12.2). One could say that a "velocity ratio" of requires a mass ratio of .
Sutton defines the mass ratio inversely as:
In this case, the values for mass fraction are always less than 1.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Rocket propellant is the reaction mass of a rocket. This reaction mass is ejected at the highest achievable velocity from a rocket engine to produce thrust. The energy required can either come from the propellants themselves, as with a chemical rocket, or from an external source, as with ion engines. Rockets create thrust by expelling mass rear-ward, at high velocity. The thrust produced can be calculated by multiplying the mass flow rate of the propellants by their exhaust velocity relative to the rocket (specific impulse).
Aerospace engineering is the primary field of engineering concerned with the development of aircraft and spacecraft. It has two major and overlapping branches: aeronautical engineering and astronautical engineering. Avionics engineering is similar, but deals with the electronics side of aerospace engineering. "Aeronautical engineering" was the original term for the field. As flight technology advanced to include vehicles operating in outer space, the broader term "aerospace engineering" has come into use.
A reaction engine is an engine or motor that produces thrust by expelling reaction mass (reaction propulsion), in accordance with Newton's third law of motion. This law of motion is commonly paraphrased as: "For every action force there is an equal, but opposite, reaction force." Examples include jet engines, rocket engines, pump-jets, and more uncommon variations such as Hall effect thrusters, ion drives, mass drivers, and nuclear pulse propulsion.
Recent photometric results have identified a new population among globular cluster stars. This population, referred to as the 'extended P1', has been suggested to be the manifestation of a new abundance pattern where the initial mass fraction of He changes ...
Primary marine aerosol (PMA)-cloud interactions off the coast of California were investigated using observations of marine aerosol, cloud condensation nuclei (CCN), and stratocumulus clouds during the Eastern Pacific Emitted Aerosol Cloud Experiment (E-PEA ...
Wiley-Blackwell2015
,
A size-composition resolved aerosol model (SCRAM) is coupled to the Polyphemus air quality platform and evaluated over Greater Paris. SCRAM simulates the particle mixing state and solves the aerosol dynamic evolution taking into account the processes of co ...