Analog television (analogue television) is the original television technology that uses analog signals to transmit video and audio. In an analog television broadcast, the brightness, colors and sound are represented by amplitude, phase and frequency of an analog signal.
Analog signals vary over a continuous range of possible values which means that electronic noise and interference may be introduced. Thus with analog, a moderately weak signal becomes snowy and subject to interference. In contrast, picture quality from a digital television (DTV) signal remains good until the signal level drops below a threshold where reception is no longer possible or becomes intermittent.
Analog television may be wireless (terrestrial television and satellite television) or can be distributed over a cable network as cable television.
All broadcast television systems used analog signals before the arrival of DTV. Motivated by the lower bandwidth requirements of compressed digital signals, beginning in the 2000s, a digital television transition is proceeding in most countries of the world, with different deadlines for the cessation of analog broadcasts. Several countries have made the switch already, with the remaining countries still in progress mostly in Africa and Asia.
History of television
The earliest systems of analog television were mechanical television systems that used spinning disks with patterns of holes punched into the disc to scan an image. A similar disk reconstructed the image at the receiver. Synchronization of the receiver disc rotation was handled through sync pulses broadcast with the image information. Camera systems used similar spinning discs and required intensely bright illumination of the subject for the light detector to work. The reproduced images from these mechanical systems were dim, very low resolution and flickered severely.
Analog television did not really begin as an industry until the development of the cathode-ray tube (CRT), which uses a focused electron beam to trace lines across a phosphor coated surface.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
This course presents the design of low-power analog CMOS integrated circuits. The techniques are based on the concept of inversion coefficient that can be used as the main design parameter for the opt
This course deals with the analyze, design and optimization of CMOS analog circuits, emphasizing low-power solutions required in a broad range of applications (e.g. IoT, wearables, Biosensors ...). S
Television (TV) is a telecommunication medium for transmitting moving images and sound. The term can refer to a television set, or the medium of television transmission. Television is a mass medium for advertising, entertainment, news, and sports. Television became available in crude experimental forms in the late 1920s, but only after several years of further development was the new technology marketed to consumers.
The first American standard for analog television broadcast was developed by the National Television System Committee (NTSC) in 1941. In 1961, it was assigned the designation System M. In 1953, a second NTSC standard was adopted, which allowed for color television broadcast compatible with the existing stock of black-and-white receivers. It is one of three major color formats for analog television, the others being PAL and SECAM. NTSC color is usually associated with the System M.
Digital television (DTV) is the transmission of television signals using digital encoding, in contrast to the earlier analog television technology which used analog signals. At the time of its development it was considered an innovative advancement and represented the first significant evolution in television technology since color television in the 1950s. Modern digital television is transmitted in high-definition television (HDTV) with greater resolution than analog TV.
Monolithic pixel sensors integrate the sensor matrix and readout in the same silicon die, and therefore present several advantages over the more largely used hybrid detectors in high-energy physics. They offer an easier detector assembly, lower cost, lower ...
EPFL2023
, , , , ,
This paper compares two in-pixel source follower stage designs for low noise CMOS image sensors embedded both on a same 5 mm by 5 mm chip fabricated in a 180 nm CIS process. The presented chip embeds two pixel variants, one based on a body-effect-canceled ...
We introduce a lock-in method to increase the phase contrast in incoherent differential phase contrast (DPC) imaging. This method improves the phase sensitivity by the analog removal of the background. The use of a smart pixel detector with in-pixel signal ...