Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of Graph Search.
Concept
Radiation resistance
Summary
Radiation resistance is that part of an antenna's feedpoint electrical resistance caused by the emission of radio waves from the antenna. In radio transmission, a radio transmitter is connected to an antenna. The transmitter generates a radio frequency alternating current which is applied to the antenna, and the antenna radiates the energy in the alternating current as radio waves. Because the antenna is absorbing the energy it is radiating from the transmitter, the antenna's input terminals present a resistance to the current from the transmitter.
Radiation resistance is an effective resistance, due to the power carried away from the antenna as radio waves. Unlike conventional resistance or "Ohmic resistance", radiation resistance is not due to the opposition to current (resistivity) of the imperfect conducting materials the antenna is made of.
The radiation resistance () is conventionally defined as the value of electrical resistance that would dissipate the same amount of power as heat, as is dissipated by the radio waves emitted from the antenna. From Joule's law, it is equal to the total power radiated as radio waves by the antenna, divided by the square of the current into the antenna terminals:
The feedpoint and radiation resistances are determined by the geometry of the antenna, the operating frequency, and the antenna location (particularly with respect to the ground). The relation between the feedpoint resistance () and the radiation resistance () depends on the position on the antenna at which the feedline is attached.
The relation between feedpoint resistance and radiation resistance is particularly simple when the feedpoint is placed (as usual) at the antenna's minimum possible voltage / maximum possible current point; in that case, the total feedpoint resistance at the antenna's terminals is equal to the sum of the radiation resistance plus the loss resistance due to "Ohmic" losses in the antenna and the nearby soil:
When the antenna is fed at some other point, the formula requires a correction factor discussed below.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Ontological neighbourhood