Overtone | EPFL Graph Search

Are you an EPFL student looking for a semester project?

Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.

An overtone is any resonant frequency above the fundamental frequency of a sound. (An overtone may or may not be a harmonic) In other words, overtones are all pitches higher than the lowest pitch within an individual sound; the fundamental is the lowest pitch. While the fundamental is usually heard most prominently, overtones are actually present in any pitch except a true sine wave. The relative volume or amplitude of various overtone partials is one of the key identifying features of timbre, or the individual characteristic of a sound. Using the model of Fourier analysis, the fundamental and the overtones together are called partials. Harmonics, or more precisely, harmonic partials, are partials whose frequencies are numerical integer multiples of the fundamental (including the fundamental, which is 1 times itself). These overlapping terms are variously used when discussing the acoustic behavior of musical instruments. (See etymology below.) The model of Fourier analysis provides for the inclusion of inharmonic partials, which are partials whose frequencies are not whole-number ratios of the fundamental (such as 1.1 or 2.14179). When a resonant system such as a blown pipe or plucked string is excited, a number of overtones may be produced along with the fundamental tone. In simple cases, such as for most musical instruments, the frequencies of these tones are the same as (or close to) the harmonics. Examples of exceptions include the circular drum – a timpani whose first overtone is about 1.6 times its fundamental resonance frequency, gongs and cymbals, and brass instruments. The human vocal tract is able to produce highly variable amplitudes of the overtones, called formants, which define different vowels. Most oscillators, from a plucked guitar string to a flute that is blown, will naturally vibrate at a series of distinct frequencies known as normal modes. The lowest normal mode frequency is known as the fundamental frequency, while the higher frequencies are called overtones.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (2)

Related people (1)

Related concepts (52)

Related courses (3)

Related lectures (25)

ME-523: Nonlinear Control Systems

Les systèmes non linéaires sont analysés en vue d'établir des lois de commande. On présente la stabilité au sens de Lyapunov, ainsi que des méthodes de commande géométrique (linéarisation exacte). Div

MATH-124: Geometry for architects I

Ce cours entend exposer les fondements de la géométrie à un triple titre : 1/ de technique mathématique essentielle au processus de conception du projet, 2/ d'objet privilégié des logiciels de concept

AR-211: Stereotomy

En histoire de l'architecture, la stéréotomie est l'art de concevoir et fabriquer des volumes complexes en pierre et des assemblages en bois. Ce cours propose une réinterprétation de la stéréotomie

A Method for Separation of Overlapping Partials Based on Similarity of Temporal Envelopes in Multi-Channel Mixtures

Harald Viste

2006

Binaural localization and separation techniques

Harald Viste

Abstract Based on binaural signals, i.e. the signals observed at the two ears, a listener can localize and recognize different sound sources and then focus on one of these. For decades, researchers have tried to invent a machine that can do the same under similar conditions. Despite all the efforts, the human auditory system is, by far, superior to any machine that has been devised. The topic of this thesis is computational techniques for the localization and separation of sources in binaural signals. In order to give an overview of different areas of research that have considered the problems of source localization and separation, we start with a review of existing techniques. This provides the background for the techniques that we propose subsequently. Binaural Localization The most important cues for localization of sound sources in binaural signals are the level and time differences between the ears. We propose a technique for the joint evaluation of these cues where noisy level difference estimates are combined with less noisy but ambiguous time difference estimates in order to provide accurate azimuth estimates. The proposed technique enables the localization of sources and the tracking of these in dynamic scenes. Head model Based on a study of the level and time differences as function of azimuth angle for different heads, we propose a generic model that is parametrized by the distance between the ears only. This enables the use of the binaural localization technique mentioned above for a listener whose head related transfer functions have not been measured. Binaural separation For the separation of sources we propose a method based on spatial windowing in the azimuth parameter space. Separation of overlapping partials Finally, we propose a technique for the separation of overlapping partials in mixtures of harmonic instruments. The technique is based on the similarity of temporal envelopes between the different partials of a harmonic note.

EPFL2004

In music, consonance and dissonance are categorizations of simultaneous or successive sounds. Within the Western tradition, some listeners associate consonance with sweetness, pleasantness, and acceptability, and dissonance with harshness, unpleasantness, or unacceptability, although there is broad acknowledgement that this depends also on familiarity and musical expertise. The terms form a structural dichotomy in which they define each other by mutual exclusion: a consonance is what is not dissonant, and a dissonance is what is not consonant.

A harmonic series (also overtone series) is the sequence of harmonics, musical tones, or pure tones whose frequency is an integer multiple of a fundamental frequency. Pitched musical instruments are often based on an acoustic resonator such as a string or a column of air, which oscillates at numerous modes simultaneously. At the frequencies of each vibrating mode, waves travel in both directions along the string or air column, reinforcing and canceling each other to form standing waves.

Symmetry in Modern Space

Explores the classification and practical applications of symmetries in 3D space, emphasizing user-driven determination of object symmetries.

Harmonic Stability Analysis ME-523: Nonlinear Control Systems

Explores stability analysis of the 1st harmonic in closed-loop systems and the importance of harmonic conditions for limit cycles.

1st Harmonic: Stability and Adaptation ME-523: Nonlinear Control Systems

Covers stability, adaptation, Nyquist criterion, and predicting limit cycle existence.