Bottom–up and top–down design

Are you an EPFL student looking for a semester project?

Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.

Bottom–up and top–down are both strategies of information processing and knowledge ordering, used in a variety of fields including software, humanistic and scientific theories (see systemics), and management and organization. In practice they can be seen as a style of thinking, teaching, or leadership. A top–down approach (also known as stepwise design and stepwise refinement and in some cases used as a synonym of decomposition) is essentially the breaking down of a system to gain insight into its compositional subsystems in a reverse-engineering fashion. In a top–down approach an overview of the system is formulated, specifying, but not detailing, any first-level subsystems. Each subsystem is then refined in yet greater detail, sometimes in many additional subsystem levels, until the entire specification is reduced to base elements. A top–down model is often specified with the assistance of "black boxes", which makes it easier to manipulate. However black boxes may fail to clarify elementary mechanisms or be detailed enough to realistically validate the model. A top–down approach starts with the big picture, then breaks down into smaller segments. A bottom–up approach is the piecing together of systems to give rise to more complex systems, thus making the original systems subsystems of the emergent system. Bottom–up processing is a type of information processing based on incoming data from the environment to form a perception. From a cognitive psychology perspective, information enters the eyes in one direction (sensory input, or the "bottom"), and is then turned into an image by the brain that can be interpreted and recognized as a perception (output that is "built up" from processing to final cognition). In a bottom–up approach the individual base elements of the system are first specified in great detail. These elements are then linked together to form larger subsystems, which then in turn are linked, sometimes in many levels, until a complete top-level system is formed.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (2)

Related concepts (5)

Related courses (3)

Related lectures (5)

Supramolecular chemistry

Supramolecular chemistry refers to the branch of chemistry concerning chemical systems composed of a discrete number of molecules. The strength of the forces responsible for spatial organization of the system range from weak intermolecular forces, electrostatic charge, or hydrogen bonding to strong covalent bonding, provided that the electronic coupling strength remains small relative to the energy parameters of the component.

Bottom–up and top–down design

Software engineering

Software engineering is an engineering-based approach to software development. A software engineer is a person who applies the engineering design process to design, develop, maintain, test, and evaluate computer software. The term programmer is sometimes used as a synonym, but may emphasize software implementation over design and can also lack connotations of engineering education or skills. Engineering techniques are used to inform the software development process, which involves the definition, implementation, assessment, measurement, management, change, and improvement of the software life cycle process itself.

EE-431: Advanced VLSI design

In this project-based course, students collect hands-on experience with designing full-custom digital VLSI circuits in dynamic logic. They learn to carry out the design and optimization on transistor

MSE-484: Properties of semiconductors and related nanostructures

This course explains the origin of optical and electrical properties of semiconductors. The course elaborates how they change when the semiconductors are reduced to sizes of few nanometers. The course

MGT-644(b): Computational Methods for Doctoral Research in Management

The objective of this course is to introduce doctoral students to computational methods for data-driven empirical research in management.

Analysis of photosensor frontends for biomedical applications: a focus on noise

Paul Stanislas Gosselin

Photosensing has proven to be highly useful in biomedical research and medical care. Being able to detect and quantify the light emitted by fluorescent or bioluminescent reporters has significantly participated in the development of new cancer treatments and made possible the development of cost-effective diagnosis techniques. While these advances relied on the large CCD devices or on laboratory-on-chips, the design of a bioluminescence-based implant for the continuous monitoring of biological data can be considered and would allow for the acquisition of insightful information in both research and care. To exist, such an implant requires a suited photosensing circuit, the design of which can be challenging due to the weakness of the target bioluminescent signal. This thesis addresses the design and evaluation of an appropriate analog-to-digital converter (ADC), with a focus on its expected accuracy. In particular, three integration-base current-to-frequency converters are considered: the current-controlled oscillator, the first-order Sigma-Delta converter with instantaneous feedback, the first-order Sigma-Delta converter with continuous feedback. Theoretical formulas are established to assess how the input-referred noise would impact the results from such ADCs, depending on the integration time as well as the time passed since last calibration. In addition to the general case, specific formulas are provided for white noise, flicker noise, and Lorentzian-shaped noise. Moreover, in practical cases that are conceivable with target application, these formulas cannot be used as they are due to the finite resolution of computing softwares. Consequently, the related implementation issues are addressed and solved. To guide the design of the current-to-frequency converters, how each of their imperfections affects their accuracy is analyzed in depth. This analysis and the obtained formulas serve a top-level-focused design strategy that is argued for in this thesis. It relies on maintaining a detailed top-level description of the system under study to help focus the designing efforts on the most impactful areas as well as guide the design choices at the transistor level. Applying such a strategy is made possible by the development of a MATLAB tool providing a flexible graphic user interface to explore the impact of each parameter of the design. In addition, to further assist the design of the ADC and/or of the photodetector, a Python tool is presented to explore configurations for successive simulations and data analyses, even when using multiple softwares. As an opening chapter, emphasizing the importance of considering the top-level in design, the case of heart rate monitoring through photoplethysmography is addressed. In this case, the highest level of the system includes the data processing, and only the latter can actually allow for drastic improvements of the power consumption by alleviating the requirements on the data acquisition. In fact, it is demonstrated that in many situations, the sampling frequency for the acquisition of the plethysmograph could be brought down to 10 to 25 Hz, while still ensuring a satisfying accuracy for the heart rate and heart rate variation monitoring.

EPFL2019

Recently, polymeric carbon nitride (g-C3N4) as a proficient photo-catalyst has been effectively employed in photocatalysis for energy conversion, storage, and pollutants degradation due to its low cost, robustness, and environmentally friendly nature. The critical review summarized the recent development, fundamentals, nanostructures design, advantages, and challenges of g-C3N4 (CN), as potential future photoactive material. The review also discusses the latest information on the improvement of CN-based heterojunctions including Type-II, Z-scheme, metal/CN Schottky junctions, noble metal@CN, graphene@CN, carbon nanotubes (CNTs)@CN, metal-organic frameworks (MOFs)/CN, layered double hydroxides (LDH)/CN heterojunctions and CN-based heterostructures for H-2 production from H2O, CO2 conversion and pollutants degradation in detail. The optical absorption, electronic behavior, charge separation and transfer, and bandgap alignment of CN-based heterojunctions are discussed elaborately. The correlations between CN-based heterostructures and photocatalytic activities are described excessively. Besides, the prospects of CN-based heterostructures for energy production, storage, and pollutants degradation are discussed.

Stencil Lithography and Thermal Scanning Probe Lithography MICRO-413: Advanced additive manufacturing technologies

Explores stencil lithography, nanostencil challenges, dynamic stenciling, and nanocutting techniques for 2D materials and electronic devices.

Advanced Nanomanufacturing: Lithography & Self-Assembly

Delves into advanced nanomanufacturing techniques, including lithography and block copolymer self-assembly for precise device fabrication.

Single Nanoparticle Printing: Top-Down Meets Bottom-Up

Explores single nanoparticle printing, electro-topographical trapping, and nanoparticle-based applications in micro/nanosystem assembly.