Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of Graph Search.
Concept
Soiling (solar energy)
Summary
Soiling is the accumulation of material on light-collecting surfaces in solar power systems. The accumulated material blocks or scatters incident light, which leads to a loss in power output. Typical soiling materials include mineral dust, bird droppings, fungi, lichen, pollen, engine exhaust, and agricultural emissions. Soiling affects conventional photovoltaic systems, concentrated photovoltaics, and concentrated solar (thermal) power. However, the consequences of soiling are higher for concentrating systems than for non-concentrating systems.
Note that soiling refers to both the process of accumulation, and the accumulated material itself.
There are several ways to reduce the effect of soiling. The antisoiling coating is most important solution for solar power projects. But water cleaning is the most widely used technique so far due to absence of antisoiling coatings in past. Soiling losses vary largely from region to region, and within regions. Average soiling-induced power losses can be below one percent in regions with frequent rain.
As of 2018, the estimated global average annual power loss due to soiling is 5% to 10% percent. The estimated soiling-induced revenue loss is 3 – 5 billion euros.
Soiling is typically caused by the deposition of airborne particles, including, but not limited to, mineral dust (silica, metal oxides, salts), pollen, and soot. However, soiling also includes snow, ice, frost, various kinds of industry pollution, sulfuric acid particulates, bird droppings, falling leaves, agricultural feed dust, and the growth of algae, moss, fungi, lichen, or biofilms of bacteria. Which of these soiling mechanisms are most prominent depends on the location.
Soiling either blocks the light completely (hard shading), or it lets through some sunlight (soft shading). With soft shading, parts of the transmitted light is scattered. Scattering makes the light diffuse, i.e. the rays go in many different directions. While conventional photovoltaics works well with diffuse light, concentrated solar power and concentrated photovoltaics relies only on the (collimated) light coming directly from the sun.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.