Cyril Cayron1992-1995 Engineering School. Ecole des Mines de Nancy.
1994-1995 Master's degree in Materials Science (rank = 1st)
1995-1996 Military Service
1996-2000 PhD at EPFL-CIME. Precipitation in 6xxx alloys and composites.
2000-2014 Researcher, Engineer and Group leader on materials for new energies at CEA-Grenoble, France.
2012 Habilitation to supervise researches (HDR)
2014-now Senior Scientist at EPFL-LMTM
Creator of the computer programs GenOVa and ARPGE (in Python).
I currently work on crystallographic models of martensitic transformations and deformation twinning.
Niels QuackProf. Dr. Niels Quack received the M.Sc. degree from Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland, in 2005, and the Dr.Sc. degree from Eidgenössische Technische Hochschule Zürich (ETH), Zürich, Switzerland, in 2010. From 2011 to 2015, he was Postdoctoral Researcher and Visiting Scholar with the Integrated Photonics Laboratory, Berkeley Sensor and Actuator Center, University of California, Berkeley, CA, USA. From 2014 to 2015, he was Senior MEMS Engineer with Sercalo Microtechnology, Neuchâtel, Switzerland. He is currently an SNSF Assistant Professor with Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland. He has authored and co-authored more than 50 papers in leading technical journals and conferences. His research interests include photonic micro and nanosystems, with an emphasis on diamond photonics and silicon photonic MEMS. He is Steering Committee Member of the IEEE International Conference on Optical MEMS and Nanophotonics (OMN) and served as General Chair of the IEEE OMN 2018 and the Latsis Symposium 2019 on Diamond Photonics. He is a Senior Member of IEEE, Member of The Optical Society (OSA) and life member of SPIE.
Alireza KarimiAlireza Karimi received his B. Sc. and M. Sc. degrees in Electrical Engineering in 1987 and 1990, respectively, from Amir Kabir University (Tehran Polytechnic). Then he received his DEA and Ph. D. degrees both on Automatic Control from Institut National Polytechnique de Grenoble (INPG) in 1994 and 1997, respectively. He was Assistant Professor at Electrical Engineering Department of Sharif University of Technology in Teheran from 1998 to 2000. Then he joined Automatic Laboratory of Swiss Federal Institute of Technology at Lausanne, Switzerland. He is currently Professor of Automatic Control and the head of "Data-Driven Modelling and Control" group. His research interests include data-driven controller tuning and robust control with application to mechatronic systems and electrical grids.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Aurelio MuttoniAurelio Muttoni is full Professor and Head of the Structural Concrete Laboratory at the Ecole Polytechnique Fédérale de Lausanne (Switzerland). He received his diploma and PhD in civil engineering from the Swiss Federal Institute of Technology, Zurich, Switzerland, in 1982 and 1989, respectively.
His current teaching activities focus on the conceptual design of structures, theory and dimensioning of concrete structures as well as bridge design. His research group is active in the following domains: behaviour and design methods for structural concrete, conceptual design of innovative structures, shear in structural concrete, punching shear of slabs, nonlinear structural analysis including its reliability, bond between steel and concrete, aggregate interlocking, fatigue and influence of sustained loading on the concrete strength, mechanical behaviour and design concepts for ultra-high performance concrete, textile concrete and recycled concrete.
Aurelio Muttoni was the recipient of the Chester Paul Siess Award for Excellence in Structural Research in 2010 and the co-recipient of the Wason Medal for Most Meritorious Paper in 2014 of the American Concrete Institute. He is a member of the Presidium of fib (International Federation for Structural Concrete), several fib commissions and task groups and has been Project Team Leader for the second generation of EN 1992-1-1 (Eurocode for structural concrete).
Aurelio Muttoni is also cofounder and partner of the Muttoni & Fernández consulting office (www.mfic.ch). This office is active in the conceptual design, analysis and dimensioning of load-bearing structure in architecture and civil engineering constructions as well as consulting activities in the field of structural engineering. Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Thomas KellerEDUCATION
1992 Dr. sc. techn. (PhD)
Swiss Federal Institute of Technology, Zurich (ETH)
1983 Dipl. Bauing. ETH (MS civil engineering)
Swiss Federal Institute of Technology, Zurich (ETH)
EMPLOYMENT
2007-present, Full Professor of Structural Engineering (100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Civil Engineering Institute
1998-2007, Associate Professor of Structural Engineering (80/100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Structural Engineering Institute
Foundation of CCLab in 2000
1996-1998, Assistant Professor of Structural Engineering (50%)
Swiss Federal Institute of Technology, Zurich (ETH)
Department of Architecture
1992-2004, Senior Project Engineer and Joint Owner
Engineering offices in Zug and Zurich
1990-1992, Research Scientist
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
1986-1990, Project Engineer
Architecture and engineering office Calatrava, Zurich
1983-1986, Teaching and Research Assistant
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
Anastasios VassilopoulosPERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : anastasios.vassilopoulos@epfl.ch Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials 