Elda Fischi GomezElda Fischi-Gomez holds a BsC and a MsC degree in Telecommunication Engineering from the Polytechnic University of Catalonia (UPC, Barcelona, Spain) and a PhD in Electrical Engineering from the Swiss Federal Institute of Technology (EPFL, Lausanne, Switzerland, 2015). Her main research interests center on the development and application of novel MRI techniques to clinics by optimising the inter-play between multi-modal MR analysis, MR physic/hardware and the underlying clinical neuroscience. She has worked as a post-doctoral fellow at the A.A. Martinos Center of Biomedical Imaging of the Massachusetts General Hospital, Harvard Medical School (Boston, MA, USA) with a Swiss National Foundation Fellowship. Since 2019 she joined the Signal Processing Laboratory 5 of the Swiss Federal Institute of Technology Lausanne (EPFL) with a SPN-PHRT individual grant from the EPFL-ETH domain on microstructure imaging for multiple sclerosis.
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Martin VetterliMartin Vetterli was appointed president of EPFL by the Federal Council following a selection process conducted by the ETH Board, which unanimously nominated him.
Professor Vetterli was born on 4 October 1957 in Solothurn and received his elementary and secondary education in Neuchâtel Canton. He earned a Bachelor’s degree in electrical engineering from ETH Zurich (ETHZ) in 1981, a Master’s of Science degree from Stanford University in 1982, and a PhD from EPFL in 1986. Professor Vetterli taught at Columbia University as an assistant and then associate professor. He was subsequently named full professor in the Department of Electrical Engineering and Computer Sciences at the University of California at Berkeley before returning to EPFL as a full professor at the age of 38. He has also taught at ETHZ and Stanford University.
Professor Vetterli has earned numerous national and international awards for his research in electrical engineering, computer science and applied mathematics, including the National Latsis Prize in 1996. He is a fellow of both the Association for Computing Machinery and the Institute of Electrical and Electronics Engineers and a member the US National Academy of Engineering. He has published over 170 articles and three reference works.
Professor Vetterli’s work on the theory of wavelets, which are used in signal processing, is considered to be of major importance by his peers, and his areas of expertise, including image and video compression and self-organized communication systems, are central to the development of new information technologies. As the founding director of the National Centre of Competence in Research on Mobile Information and Communication Systems, Professor Vetterli is a staunch advocate of transdisciplinary research.
Professor Vetterli knows EPFL inside and out. An EPFL graduate himself, he began been teaching at the school in 1995, was vice president for International Affairs and then Institutional Affairs from 2004 to 2011, and served as dean of the School of Computer and Communication Sciences in 2011 and 2012. In addition to his role as president of the National Research Council of the Swiss National Science Foundation, a position he held from 2013 to 2016, he heads the EPFL’s Audiovisual Communications Laboratory (LCAV) since 1995.
Professor Vetterli has supported more than 60 students in Switzerland and the United States in their doctoral work and makes a point of following their highly successful careers, whether it is in the academic or business world.
He is the author of some 50 patents, some of which were the basis for start-ups coming out of his lab, such as Dartfish and Illusonic, while others were sold (e.g. Qualcomm) as successful examples of technology transfer. He actively encourages young researchers to market the results of their work.
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Hannes BleulerSwiss, Born 19.2.1954
1973-78 ETH Zurich, M.S. in Electrical Engineering
1979-84 Teaching Assistant, Doctorate Student at ETH (Inst. of Mechanics)
1984 Ph.D. thesis in Mechatronics (magnetic bearings, Prof. G. Schweitzer)
1985-87 Research Engineer at Hitachi Ltd, Japan, Mechanical Engineering Research Laboratory;
1987 Invited researcher at the Tokyo Institute of Technology (Precision Mechatronics, Prof. K. Ono)
1988-91 Lecturer and Senior Assistant at ETH ; co-foundation of MECOS-Traxler AG
1991-95 Toshiba Chair of "Intelligent Mechatronics" and then regular Associate Professor at The University of Tokyo (Institute of Industrial Science)
1995-present Full Professor at EPFL Lausanne on microrobotics, biomedical robotics;
2000 Co-founder of xitact SA, Morges (robotic surgery instrumentation & simulators)
2002-2006 President Conference of Professors and Lecturers of EPFL, member of Assemblée de l'Ecole
2006 Chairman of ISMB10 (10th International Symposium on Magnetic Bearings, Martigny, Switzerland)
2006 Nomination as member of the Swiss Academy of Technical Sciences (SATW)
