Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Alireza KarimiAlireza Karimi received his B. Sc. and M. Sc. degrees in Electrical Engineering in 1987 and 1990, respectively, from Amir Kabir University (Tehran Polytechnic). Then he received his DEA and Ph. D. degrees both on Automatic Control from Institut National Polytechnique de Grenoble (INPG) in 1994 and 1997, respectively. He was Assistant Professor at Electrical Engineering Department of Sharif University of Technology in Teheran from 1998 to 2000. Then he joined Automatic Laboratory of Swiss Federal Institute of Technology at Lausanne, Switzerland. He is currently Professor of Automatic Control and the head of "Data-Driven Modelling and Control" group. His research interests include data-driven controller tuning and robust control with application to mechatronic systems and electrical grids.
Marco GrioniMarco Grioni was born in Milan (Italy) where he graduated in 1982. He has occupied research positions at Minneapolis (USA), Nijmegen (The Netherlands), Orsay (France) and Neuchâtel, where he became Privat Docent in Solid State Physics in 1994. Since 1996 he is at EPFL, where he teaches physics to undergraduate and graduate students. He is acting director of the Laboratory of Electron Spectroscopy of IPN, and an adjunct professor from 2005.
His research interests concern the electronic properties of novel materials,namely high-temperature superconductors, low-dimensional metals, and heavy fermion compounds, which he investigates by high-resolution photoemission (ARPES), ultrafast time-resolved ARPES, and photon-in photon-out synchrotron-based spectroscopies. Author of approx. 220 scientific articles, he is actively involved in the development of new instruments. From 2003 to 2006 he was the chairman of the users organization of the European Synchrotron Radiation Facility (ESRF Grenoble). Between 2010 and 2017 he served as chairman of the scientific advisory committee of the french national synchrotron light source SOLEIL
Matteo Dal PeraroMatteo Dal Peraro graduated in Physics at the University of Padua in 2000. He obtained his Ph.D. in Biophysics at the International School for Advanced Studies (SISSA, Trieste) in 2004. He then received postdoctoral training at the University of Pennsylvania (Philadelphia) under the guidance of Prof. M. L. Klein. He was nominated Tenure Track Assistant Professor at the EPFL School of Life Sciences in late 2007.
His research at the Laboratory for Biomolecular Modeling (LBM), within the Interfaculty Institute of Bioengineering (IBI), focuses on the multiscale modeling of large macromolecular systems.
Alexander TagantsevALEXANDER K. TAGANTSEV received the B.S. degree from St. Petersburg State University, in 1974, and Ph.D. degree from Ioffe Physico-Technical Institute, St. Petersburg, Russia, in 1982 in solid state physics. Before 1993, he worked in Ioffe Physico-Technical Institute, (1991-1993, head of laboratory), and St. Petersburg State Technical University (1991-1993, professor). He joined the ceramics laboratory of EPFL in 1993 where he was leading ( up to 2016) the section for Modeling and theory of Electroceramics. He is also currently engaged as a principle research fellow at Ioffe institute (St. Petersburg, Russia). Tagantsev is a theoretician of a broad domain of expertise from ferroelectricity and phonon physics to electrodynamics of superconductors and quantum optics. He is the author of key results on the theory of microwave dielectrics loss, dielectric polarization in crystalline materials, and relaxor ferroelectricity. He is also known in the field of ferroelectric thin films for elucidating works on the polarization switching and degradation in these systems. He authored or co-authored more than 300 scientific articles and two monograph (on domains in ferroics and tunable film bulk acoustic wave resonators). In 2007, Prof. Tagantsev was entitled to the Honors for lifetime achievement in the field of integrated ferroelectrics by the International Symposium on Integrated Ferroelectrics.
Oleg YazyevProf. Oleg Yazyev (Олег Язев) was born in Simferopol, Crimean peninsula. He obtained his degree in chemistry from Moscow State University in 2003. He then joined Ecole Polytechnique Fédérale de Lausanne (EPFL) completing his PhD thesis in chemistry and chemical engineering in 2007. Next two years he has spent as a postdoctoral fellow at the Institute of Theoretical Physics (ITP) and the Institute for Numerical Research in the Physics of Materials (IRRMA) of the same institution. In 2009-2011 he was a postdoctoral fellow at the Department of Physics of the University of California, Berkeley and the Lawrence Berkeley National Laboratory. In September 2011 he started an independent research group supported by the Swiss National Science Foundation professorship grant. In 2012 he was awarded an ERC Starting grant. His current research focuses on theoretical and computational physics of two-dimensional and topological materials with strong emphasis on their prospective technological applications. ResearcherID profile of Oleg Yazyev Google Scholar profile of Oleg Yazyev
Françoise Gisou van der Goot GrunbergGisou van der Goot is the Head of the Laboratory of Cell and Membrane Biology, and founding member of the Global Health Institute (GHI), School of Life Sciences, at the Swiss Federal Institute of Technology Lausanne/EPFL (Ecole Polytechnique Fédérale de Lausanne). She is currently Vice President for Responsible Transformation, in charge of reinforcing values such as inclusion and sustainability throughout the School’s campus. From 2014 to 2020, she was Dean of the School of Life Sciences. Before joining EPFL, she was Group Leader at the Faculty of Sciences of the University of Geneva (UNIGE) and subsequently Associate Professor at the Faculty of Medicine of the same university. She studied engineering at the Ecole Centrale de Paris, then did a PhD in Molecular Biophysics at the Nuclear Energy Research Center, Saclay, France, followed by a postdoc at the European Molecular Biology Laboratory (EMBL) in Heidelberg. She obtained an EMBO Young Investigator award in 2001, a Howard Hughes International Scholar award in 2005 and the Swiss Prix Marcel Benoist in 2009, the same year she was elected EMBO member (European Molecular Biology Organisation). She is a leader in the fields of molecular and cellular understanding of bacterial toxins, the organization of mammalian membranes and in organelles biology. Professor van der Goot is member of diverse scientific boards such as the Swiss National Science Foundation (SNF), the Conseil suisse de la science et de la technologie (CSST) and the European Research Council (ERC).
Zhaofu Fei1999, Phd in Chemistry, Braunschweig, Germany,
2002, Lausanne, EPFL, Scientist.
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 