A rake receiver is a radio receiver designed to counter the effects of multipath fading. It does this by using several "sub-receivers" called fingers, that is, several correlators each assigned to a different multipath component. Each finger independently decodes a single multipath component; at a later stage the contribution of all fingers are combined in order to make the most use of the different transmission characteristics of each transmission path. This could very well result in higher signal-to-noise ratio (or Eb/N0) in a multipath environment than in a "clean" environment.
The multipath channel through which a radio wave transmits can be viewed as transmitting the original (line of sight) wave pulse through a number of multipath components. Multipath components are delayed copies of the original transmitted wave traveling through a different echo path, each with a different magnitude and time-of-arrival at the receiver. Since each component contains the original information, if the magnitude and time-of-arrival (phase) of each component is computed at the receiver (through a process called channel estimation), then all the components can be added coherently to improve the information reliability.
A rake receiver utilizes multiple correlators to separately detect the M strongest multipath components. Each correlator output may be quantized using several bits. Demodulation and bit decisions are then based on the weighted outputs of the M correlators, which provide a better estimate of the transmitted signal than is provided by a single component.
Rake receivers must have either a general-purpose CPU or some other form of digital signal processing hardware in them to process and correlate the intended signal. Rake receivers only became common after 16-bit CPUs capable of signal processing became widely available. The rake receiver was patented in the US by Robert Price and Paul E. Green in July 1956, (U.S. Pat. No. 2,982,853) but it took until the 1970s to design practical implementations of the receiver.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Introduction to analog CMOS design for Remote Biosensors on Chip. Understanding and designing of active and remotely powered biosensing systems. Basic understanding of eh wireless transmission of teh
The students will learn about the basic principles of wireless communication systems, including transmission and modulation schemes as well as the basic components and algorithms of a wireless receive
Aside from intentional interference, multipath is the most significant error source for Global Navigation Satellite Systems (GNSS) receivers in many operational scenarios. In this thesis, we study the multipath estimation from two different perspectives: t ...
EPFL2018
, ,
LoRaWAN is a low-power wireless technology that provides long-range connectivity to battery-powered Internet of Things (IoT) devices. To minimize the energy consumption of the IoT nodes, LoRaWAN networks use for the uplink a pure non-slotted ALOHA multiple ...
A signal processing apparatus, being configured for transmitting and receiving coherent parallel optical signals, comprises a transmitter apparatus including a first single soliton micro-resonator device and a modulator device, wherein the first single sol ...