Concept

Thermal design power

Related publications (80)

Numerical Simulations of Pulsating Heat Pipes, Part 2: Comparison to Experimental Data

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Raffaele Luca Amalfi, Filippo Cataldo

Due to the local pulsating/transient nature and complex thermal-hydraulic coupling of a closed loop pulsating heat pipe (CLPHP), there is a need to develop an effective simulation code capable to design and predict the local and overall thermal performance ...

IEEE2019

Which sensor type at which location should offices with south orientated window choose to improve comfort and reduce energy consumption?

Dolaana Khovalyg

The common placement of thermostats in offices might not reflect the actual thermal environment around occupants and influence the energy use. In this research, it is questioned which type of thermostat at which location better represents the conditions in ...

2019

Fast Energy Estimation Through Partial Execution of HPC Applications

Marina Zapater Sancho, José Luis Ayala Rodrigo

In order to optimize the energy use of servers in Data Centers, techniques such as power capping or power budgeting are usually deployed. These techniques rely on the prediction of the power and execution time of applications. These data are obtained via d ...

IEEE2018

NoCs:a Short History of Success and a Long Future

Giovanni De Micheli

The broad application of NoCs in IC design has been enabled by NoC synthesis tools that evolved from university prototypes to full commercial synthesis flows. NoC embodiments are ubiquitously present in circuits and systems. As systems evolve to include ne ...

2018

Design Optimization of 3D Multi-Processor System-on-Chip with Integrated Flow Cell Arrays

David Atienza Alonso, Marina Zapater Sancho, Ayse Kivilcim Coskun, Artem Andreev, Fulya Kaplan

Integrated flow cell array (FCA) is an emerging technology, targeting the cooling and power delivery challenges of modern 2D/3D Multi-Processor Systems-on-Chip (MPSoCs). In FCA, electrolytic solutions are pumped through microchannels etched in the silicon ...

2018

Experimental characterisation of the thermohydraulic performance of a micro-pin fin evaporator: Heat transfer, flow visualization and modelling

Chiara Falsetti

The global tendency towards miniaturization driven by the microelectronics industry is pushing system density and packaging towards unprecedented values of thermal design power, with a dramatic reduction of the surface area of the devices. Vertical integra ...

EPFL2018

PowerCool: Simulation of Cooling and Powering of 3D MPSoCs with Integrated Flow Cell Arrays

David Atienza Alonso, Marina Zapater Sancho, Arvind Raj Mahankali Sridhar, Mohamed Mostafa Sabry Aly, Artem Andreev, Bruno Michel

Integrated Flow-Cell Arrays (FCAs) represent a combination of integrated liquid cooling and on-chip power generation, converting chemical energy of the flowing electrolyte solutions to electrical energy. The FCA technology provides a promising way to addre ...

Institute of Electrical and Electronics Engineers2017

A 30 mu W Remotely Powered Local Temperature Monitoring Implantable System

Catherine Dehollain

An implantable local temperature monitoring system for a laboratory mouse is presented. Magnetic coupling is used to remotely power the passive implant. The temperatures of two local points are monitored by thermistors. A low-power readout circuit is imple ...

Ieee-Inst Electrical Electronics Engineers Inc2017

Recent improvements on micro-thermocouple based SThM

Danick Briand

The scanning thermal microscope (SThM) has become a versatile tool for local surface temperature mapping or measuring thermal properties of solid materials. In this article, we present recent improvements in a SThM system, based on a micro-wire thermocoupl ...

Iop Publishing Ltd2017

Two-phase operational maps, pressure drop, and heat transfer for flow boiling of R236fa in a micro-pin fin evaporator

John Richard Thome, Navid Borhani, Mirco Magnini, Chiara Falsetti, Hamideh Jafarpoorchekab

Cooling the new generation of 3D high power electronic chips is one of the leading challenges in microelectronics, as it is a key to achieve high computational performance at lower cooling system power consumption, thus reducing the operating cost. Two-pha ...

Pergamon-Elsevier Science Ltd2017

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.