A winepress is a device used to extract juice from crushed grapes during winemaking. There are a number of different styles of presses that are used by wine makers but their overall functionality is the same. Each style of press exerts controlled pressure in order to free the juice from the fruit (most often grapes). The pressure must be controlled, especially with grapes, in order to avoid crushing the seeds and releasing a great deal of undesirable tannins into the wine. Wine was being made at least as long ago as 4000 BC; in 2011, a winepress was unearthed in Armenia with red wine dated 6,000 years old.
A basket press consists of a large basket filled with the crushed grapes. Pressure is applied through a plate that is forced down onto the fruit. The mechanism to lower the plate is often either a screw or a hydraulic device. The juice flows through openings in the basket. The basket style press was the first type of mechanized press to be developed, and its basic design has not changed in nearly 1000 years.
A horizontal screw press works using the same principle as the basket press. Instead of a plate being brought down to put pressure on the grapes, plates from either side of a closed cylinder are brought together to squeeze the grapes. Generally the volume of grapes handled is significantly greater than that of a basket press.
A bladder press consists of a large cylinder, closed at each end, into which the fruit is loaded. To press the grapes, a large bladder expands and pushes the grapes against the sides. The juice then flows out through small openings in the cylinder. The cylinder rotates during the process to help homogenize the pressure that is placed on the grapes.
A continuous screw press differs from the above presses in that it does not process a single batch of grapes at a time. Instead it uses an Archimedes' screw to continuously force grapes up against the wall of the device. Juice is extracted, and the pomace continues through to the end where it is extracted.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
In winemaking, pressing is the process where juice is extracted from the grapes with the aid of a wine-press, by hand, or even by the weight of the grape berries and clusters. Historically, intact grape clusters were trodden by feet but in most wineries today the grapes are sent through a crusher/destemmer, which removes the individual grape berries from the stems and breaks the skins, releasing some juice, prior to being pressed.
The phenolic content in wine refers to the phenolic compounds—natural phenol and polyphenols—in wine, which include a large group of several hundred chemical compounds that affect the taste, color and mouthfeel of wine. These compounds include phenolic acids, stilbenoids, flavonols, dihydroflavonols, anthocyanins, flavanol monomers (catechins) and flavanol polymers (proanthocyanidins). This large group of natural phenols can be broadly separated into two categories, flavonoids and non-flavonoids.
Ancient Rome played a pivotal role in the history of wine. The earliest influences on the viticulture of the Italian peninsula can be traced to ancient Greeks and the Etruscans. The rise of the Roman Empire saw both technological advances in and burgeoning awareness of winemaking, which spread to all parts of the empire. Rome's influence has had a profound effect on the histories of today's major winemaking regions in France, Germany, Italy, Portugal and Spain.
In recent years, the recovery of valuable compounds from food waste like grape pomace is an emerging issue in the food sector. Grape pomace or marc can be considered as an important solid waste that is produced from the wine industries after the pressing a ...