Publications related to Aluminium-conductor steel-reinforced cable

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance

Pierluigi Bruzzone, Kamil Sedlák

The impact of electromagnetic (EM) and thermal cyclic loading (referred as warm-up-cool-down-WUCD) on the Nb3Sn cable in conduit conductors for the toroidal field magnets of the ITER tokamak should be carefully assessed for the proper operation of the mach ...

IOP PUBLISHING LTD2021

T-cs degradation of ITER TF samples due to fast current discharges

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

Direct current tests performed in the past on the conductor samples of the toroidal field (TF) ITER coils revealed degradation of current sharing temperature, T-cs. The degradation progresses with repetitive electromagnetic loading, and also with thermal c ...

IOP PUBLISHING LTD2021

Dimensional scaling of thin-film stimulation electrode systems in translational research

Stéphanie Lacour, Giuseppe Schiavone, Nicolas Vachicouras

Objective. Electrical stimulation of biological tissue is an established technique in research and clinical practice that uses implanted electrodes to deliver electrical pulses for a variety of therapies. Significant research currently explores new electro ...

2021

Optimization Method for Extracting Stabilizer Geometry and Properties of REBCO Tapes

Francesco Grilli, Nicolo' Riva, Arooj Akbar, Bertrand Dutoit

A good knowledge of material properties is a critical aspect for modeling high-temperature superconductor (HTS) devices. However, the electrical resistivity of coated conductors above the critical current is limited. The major challenge in characterizing t ...

2021

Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

Pierluigi Bruzzone, Mithlesh Kumar, Vincenzo D'Auria

Future high-field accelerator magnets foresee the extensive use of Nb3Sn, more expensive than the Nb-Ti of LHC. For projects involving the series production of magnets, conductor grading is mandatory in order to reduce the cost. To allow grading ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

AC Loss Measurement of the DEMO TF React&Wind Conductor Prototype No. 2

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

The EUROfusion DEMO is being designed as the fusion machine to be built after ITER. During the preconceptual phase, several design options are investigated by theoretical analyses as well as tests on newly developed conductor prototypes. One design option ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020

On the representation of thin wires inside lossy dielectric materials for FDTD‐based LEMP simulations

Marcos Rubinstein, Akiyoshi Tatematsu

The finite-difference time-domain method is one of the most widely used numerical electromagnetic computation techniques, and it has become an effective tool for analyzing electromagnetic transient phenomena in three-dimensional structures and grounding sy ...

2019

The 16 T Dipole Development Program for FCC and HE-LHC

Pierluigi Bruzzone, Peng Gao, Luca Bottura, Stephan Russenschuck, Mariusz Juchno, Bernhard Auchmann, Giuseppe Montenero

A future circular collider (FCC) with a center-of-mass energy of 100 TeV and a circumference of around 100 km, or an energy upgrade of the LHC (HE-LHC) to 27 TeV require bending magnets providing 16 Tin a SO-mm aperture. Several development programs for th ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Aluminium-conductor steel-reinforced cable

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance

T-cs degradation of ITER TF samples due to fast current discharges

Dimensional scaling of thin-film stimulation electrode systems in translational research

Optimization Method for Extracting Stabilizer Geometry and Properties of REBCO Tapes

Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

AC Loss Measurement of the DEMO TF React&Wind Conductor Prototype No. 2

The Upper Bound of the Speed of Propagation of Waves along a Transmission Line

On the representation of thin wires inside lossy dielectric materials for FDTD‐based LEMP simulations

The 16 T Dipole Development Program for FCC and HE-LHC

Graph Chatbot

Chat with Graph Search

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

T-cs degradation of ITER TF samples due to fast current discharges

Optimization Method for Extracting Stabilizer Geometry and Properties of REBCO Tapes

Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

AC Loss Measurement of the DEMO TF React&Wind Conductor Prototype No. 2

The Upper Bound of the Speed of Propagation of Waves along a Transmission Line

The 16 T Dipole Development Program for FCC and HE-LHC

Dimensional scaling of thin-film stimulation electrode systems in translational research

On the representation of thin wires inside lossy dielectric materials for FDTD‐based LEMP simulations

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance