A gas balloon is a balloon that rises and floats in the air because it is filled with a gas lighter than air (such as helium or hydrogen). When not in flight, it is tethered to prevent it from flying away and is sealed at the bottom to prevent the escape of gas. A gas balloon may also be called a Charlière for its inventor, the Frenchman Jacques Charles. Today, familiar gas balloons include large blimps and small latex party balloons. For nearly 200 years, well into the 20th century, manned balloon flight utilized gas balloons before hot-air balloons became dominant. Without power, heat or fuel, untethered flights of gas balloons depended on the skill of the pilot. Gas balloons have greater lift for a given volume, so they do not need to be so large, and they can stay up for much longer than hot air balloons.
History of ballooning
The first gas balloon made its flight in August 1783. Designed by professor Jacques Charles and Les Frères Robert, it carried no passengers or cargo. On 1 December 1783, their second hydrogen-filled balloon made a manned flight piloted by Jacques Charles and Nicolas-Louis Robert. This occurred ten days after the first manned flight in a Montgolfier hot air balloon.
The next project of Jacques Charles and the Robert brothers was La Caroline, an elongated steerable craft that followed Jean Baptiste Meusnier's proposals for a dirigible balloon, incorporating internal ballonnets (air cells), a rudder and a method of propulsion. On September 19, 1784 the brothers and M. Collin-Hullin flew for 6 hours 40 minutes, covering 186 km from Paris to Beuvry near Béthune. This was the first flight over 100 km.
Gas balloons remained popular throughout the age before powered flight. Filled with hydrogen or coal gas, they were able to fly higher, further and more economically than hot-air balloons. The altitude was controlled with ballast weights that were dropped if the balloon got too low; in order to land some lifting gas was vented through a valve.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
A balloon is a flexible bag that can be inflated with a gas, such as helium, hydrogen, nitrous oxide, oxygen, and air. For special tasks, balloons can be filled with smoke, liquid water, granular media (e.g. sand, flour or rice), or light sources. Modern day balloons are made from materials such as rubber, latex, polychloroprene, or a nylon fabric, and can come in many different colors. Some early balloons were made of dried animal bladders, such as the pig bladder.
A lifting gas or lighter-than-air gas is a gas that has a density lower than normal atmospheric gases and rises above them as a result. It is required for aerostats to create buoyancy, particularly in lighter-than-air aircraft, which include free balloons, moored balloons, and airships. Only certain lighter than air gases are suitable as lifting gases. Dry air has a density of about 1.29 g/L (gram per liter) at standard conditions for temperature and pressure (STP) and an average molecular mass of 28.
In aeronautics, a balloon is an unpowered aerostat, which remains aloft or floats due to its buoyancy. A balloon may be free, moving with the wind, or tethered to a fixed point. It is distinct from an airship, which is a powered aerostat that can propel itself through the air in a controlled manner. Many balloons have a basket, gondola, or capsule suspended beneath the main envelope for carrying people or equipment (including cameras and telescopes, and flight-control mechanisms).
Explores stresses in thin-walled pressure vessels, calculating hoop stresses in different scenarios and emphasizing geometry's role in stress distribution.
The Modular Multiplatform Compatible Air Measurement System (MoMuCAMS) is a newly developed in situ aerosol and trace gas measurement platform for lower-atmospheric vertical profiling. MoMuCAMS has been primarily designed to be attached to a Helikite, a ru ...
The Alaskan Layered Pollution and Chemical Analysis (ALPACA) field campaign investigated the sources and processing of wintertime urban pollution in Fairbanks, Alaska in January and February 2022. Several sites located around the city of Fairbanks collecte ...
Autonomous ballooning allows for energy-efficient long-range missions but introduces significant challenges for planning and control algorithms, due to their single degree of actuation: vertical rate control through either buoyancy or vertical thrust. Late ...