Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The shear resistance of elements without stirrups has mainly been investigated by test setups involving simply supported beams of constant thickness subjected to one- or two-point loading, and most of the formulas included in codes have been adjusted using ...
Punching shear reinforcement is an efficient method to increase not only the strength but also the deformation capacity of flat slabs supported by columns. Especially, the increase in deformation capacity is desired so that the load can be distributed to o ...
We show bending of light on the same side of the normal in a free-standing corrugated metal film under bidirectional illumination. Coherent perfect absorption (CPA) is exploited to suppress the specular zeroth order leading to effective back-bending of lig ...
This paper investigates the effects of glass type (annealed, heat-strengthened and fully tempered), reinforcement percentage (hollow section and full section) and beam size (1.5 and 3.2 m) on the structural response of SG-laminated reinforced glass beams. ...
The CLIC damping rings are designed to produce unprecedentedly low-emittances of 500 nm and 5 nm normalized at 2.86 GeV, in all beam dimensions with high bunch charge, necessary for the performance of the collider. The large beam brightness triggers a numb ...
This paper sheds light on some of the graphical methods used by Robert Maillart to design the Salginatobel Bridge, a three-hinged concrete structure spanning 90 meters. Built in 1929, this masterpiece has since received extensive recognition both for its s ...
Japan Atomic Energy Agency (JAEA) has fabricated and tested the four conductor samples composed of high performance strands manufactured by the bronze-route process for the ITER Central Solenoid (CS) conductor. The current sharing temperature (Tcs) electri ...
Steel-concrete composite bridges with twin-I steel girders and prefabricated slabs constitute an economical and competitive solution for small and medium bridge spans. In recent years they have started to gain their share in the construction market. Howeve ...
Auxetic materials expand when stretched, and shrink when compressed. This is the result of a negative Poisson's ratio ν. Isotropic configurations with ν≈−1 have been designed and are expected to provide increased shear stiffness G. This assumes that Young' ...
A model for predicting the buckling and wrinkling behavior of glass-fiber-reinforced polymer (GFRP) plates and sandwich panels subjected to in-plane biaxial compression-tension loading is presented in this paper. In-plane biaxial compression-tension loadin ...