A saturable reactor in electrical engineering is a special form of inductor where the magnetic core can be deliberately saturated by a direct electric current in a control winding. Once saturated, the inductance of the saturable reactor drops dramatically. This decreases inductive reactance and allows increased flow of the alternating current (AC).
Saturable reactors provide a very simple means to remotely and proportionally control the AC through a load such as an incandescent lamp; the AC current is roughly proportional to the direct current (DC) through the control winding.
The power windings, the control winding, and the core are arranged so that the control winding is well isolated from the AC power. The AC power windings are also usually configured so that they self-cancel any AC voltage that might otherwise be induced in the control winding.
Because the required inductance to achieve dimming varies with the size of the load, saturable reactors often have multiple taps, allowing a small inductance to be used with a large load or a larger inductance to be used with a smaller load. In this way, the required magnitude of the control current can be kept roughly constant, no matter what the load.
Saturable reactors designed for mains (power-line) frequency are larger, heavier, and more expensive than electronic power controllers developed after the introduction of semiconductor electronic components, and have largely been replaced by thyristor dimmers using triacs or SCRs.
However, as of 2015, there has been renewed interest in using these devices for control of "smart grids" with multiple current tested installations in California, as well as the United Kingdom.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
A magnetic core is a piece of magnetic material with a high magnetic permeability used to confine and guide magnetic fields in electrical, electromechanical and magnetic devices such as electromagnets, transformers, electric motors, generators, inductors, magnetic recording heads, and magnetic assemblies. It is made of ferromagnetic metal such as iron, or ferrimagnetic compounds such as ferrites. The high permeability, relative to the surrounding air, causes the magnetic field lines to be concentrated in the core material.
An electronic component is any basic discrete electronic device or physical entity part of an electronic system used to affect electrons or their associated fields. Electronic components are mostly industrial products, available in a singular form and are not to be confused with electrical elements, which are conceptual abstractions representing idealized electronic components and elements. Electronic components have a number of electrical terminals or leads.
Seen in some magnetic materials, saturation is the state reached when an increase in applied external magnetic field H cannot increase the magnetization of the material further, so the total magnetic flux density B more or less levels off. (Though, magnetization continues to increase very slowly with the field due to paramagnetism.) Saturation is a characteristic of ferromagnetic and ferrimagnetic materials, such as iron, nickel, cobalt and their alloys. Different ferromagnetic materials have different saturation levels.
This class adresses scaling laws in MEMS/NEMS. The dominant physical effects and scaling effects when downsizing sensors and actuators in microsystems are discussed, across a broad range of actuation
Printed electronics has promised to deliver low-cost, large-area and flexible electronics for mass-market applications for some time; however, so far one limiting factor has been device performance. Over the last decade, great progress has been made in ter ...
The invention relates to a method and a device for determining plasma characteristics, the method comprising the steps of: - arranging a measurement probe (2) having a self-inductance in proximity to a plasma (3) to establish inductive coupling between the ...
2016
, ,
Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...