Concept

Diaphragm (structural system)

Related publications (12)

Deformation capacity evaluation for flat slab seismic design

Aurelio Muttoni, Lorenzo Martinelli, António Manuel Pinho Ramos, Andri Setiawan

In flat-slab frames, which are typically designed as secondary seismic structures, the shear failure of the slab around the column (punching failure) is typically the governing failure mode which limits the deformation capacity and can potentially lead to ...

SPRINGER2022

Numerical Simulation of Unreinforced Masonry Buildings with Timber Diaphragms

Katrin Beyer, Francesco Vanin, Igor Tomic, Ivana Bozulic

Though flexible diaphragms play a role in the seismic behaviour of unreinforced masonry buildings, the effect of the connections between floors and walls is rarely discussed or explicitly modelled when simulating the response of such buildings. These flexi ...

2021

Decay of Torsional Stiffness in RC U-Shaped Walls

Katrin Beyer, Ryan Hoult

Reinforced concrete (RC) U-shaped walls are a popular construction choice, commonly used to resist the lateral loads from wind and earthquakes. In many buildings, the center of stiffness of a floor is eccentric from the center of mass and the building will ...

ASCE-AMER SOC CIVIL ENGINEERS2020

Seismic Performance Characterization of Wood-Sheathed and Cold-Formed Steel Framed Floor and Roof Diaphragm Structures

Dimitrios Lignos

This paper describes a research program involving wood-sheathed and cold-formed steel (CFS) framed diaphragm assemblies.The diaphragm’s response to in-plane monotonic and reversed cyclic lateral loading is investigated in an effort to characterize the seis ...

Asce-Amer Soc Civil Engineers2018

SEISMIC RETROFIT OF GUSSET PLATE CONNECTIONS THROUGH FINITE ELEMENT ANALYSIS MASTER PROJECT

Sacha Roger Laffely

Steel concentrically braced frame (CBFs) are widely used as a laterally-resisting system in the case of seismic actions as they are generally easier and faster to erect, and in most cases, they cost less than moment-resisting frame system. However, special ...

2018

Characterization of Cold-Formed Steel Framed/Wood Sheathed Floor and Roof Diaphragm Structures

Dimitrios Lignos

The seismic in-plane response of cold-formed steel (CFS) framed diaphragm structures has not been the subject of extensive study. The information available specific to diaphragm design in the North American CFS design standard is based on limited experimen ...

International Association of Earthquake Engineering2017

Shear in reinforced concrete without transverse reinforcement

Francesco Cavagnis

Since the first applications of structural concrete, the shear behaviour of one-way slabs without transverse reinforcement has been largely investigated. Nevertheless, currently in the scientific community there is no general agreement on the mechanisms of ...

EPFL2017

Reducing the uncertainty on the structural behaviour of existing structures through data interpretation

Ian Smith, Pierino Lestuzzi, Yves Sylvain Gilles Reuland

This paper presents a methodology for reducing the uncertainty related to the structural behaviour of an existing building in view of a vulnerability assessment regarding future earthquake actions. Estimating the lateral load resistance is a step towards e ...

2015

Comparison of force-based and displacement-based design approaches for RC coupled walls in New Zealand

Katrin Beyer

Reinforced concrete coupled walls are a common lateral load resisting system used in multi-storey buildings. The effect of the coupling beams can improve seismic performance, but at the same time adds complexity to the design procedure. A case study couple ...

2014

Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges

Aurelio Muttoni, Miguel Fernández Ruiz, Michael Markus Rupf

Assessing the strength of existing structures has become a major issue for structural engineers. Such analyses are often performed after changes of use of the structure or due to new design codes requirements. This is particularly relevant with respect to ...

Engineering structures2013

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.