Earth's magnetic field | EPFL Graph Search

Earth's magnetic field, also known as the geomagnetic field, is the magnetic field that extends from Earth's interior out into space, where it interacts with the solar wind, a stream of charged particles emanating from the Sun. The magnetic field is generated by electric currents due to the motion of convection currents of a mixture of molten iron and nickel in Earth's outer core: these convection currents are caused by heat escaping from the core, a natural process called a geodynamo. The magnitude of Earth's magnetic field at its surface ranges from . As an approximation, it is represented by a field of a magnetic dipole currently tilted at an angle of about 11° with respect to Earth's rotational axis, as if there were an enormous bar magnet placed at that angle through the center of Earth. The North geomagnetic pole actually represents the South pole of Earth's magnetic field, and conversely the South geomagnetic pole corresponds to the north pole of Earth's magnetic field (bec

Enhanced-performance integrated Resonant Switched-Capacitor and Buck DC-DC converters for application in extreme radiation and magnetic field environments

Giacomo Ripamonti

DC-DC converters based on Application Specific Integrated Circuits (ASICs) have been developed in this doctoral work for the High-Luminosity Large Hadron Collider (HL-LHC) experiments at CERN. They step down the voltage from a 2.5 V line and supply a load current up to 3 A. The main focus has been the miniaturization of the converters while maintaining high efficiency, together with the improvement of the dynamic performance and the minimization of the impact of substrate parasitic devices. These are challenges that industry and research are facing to power modern microprocessors, with the aim of minimizing the system volume, cost and power consumption, while guaranteeing good regulation performance. Miniaturization is a key requirement for application in the HL-LHC experiments, since any added material is detrimental for the physics performance. In addition, the converters must be tolerant to a high magnetic field (up to 4 T) and to ultra-high levels of radiation. Tolerance to the magnetic field is achieved by employing air-core inductors (which are the bulkiest components on the board), while radiation-hard ASICs have been designed in this work in a commercial 130 nm CMOS technology by extensively applying hardening by design techniques. Converters using two different architectures have been designed: a buck converter, which had been identified in a previous work as a good option to achieve high efficiency and low mass, and a Resonant Switched-Capacitor (ReSC) converter, which can further increase the power density while keeping high efficiency. A novel dual-edge pulse width modulator for the buck converter that has improved dynamic performance compared to conventional solutions has been designed and implemented. Its small-signal response has been modeled, and the model has been validated by measurements. In addition, this thesis proposes an integrated system that monitors in real-time the voltage stress experienced by the devices of the buck converter and adjusts its operation accordingly, in order to guarantee the required reliability, while maximizing the efficiency. The main building block of this system has been designed and has proved to be fully functional. A substrate-currents-aware characterization method that allows the evaluation of the impact of substrate parasitic devices on the circuit performance and reliability has been also devised, and it has been applied to select the best floor-plan for the buck converter. A novel control scheme that optimizes the efficiency of the ReSC converter for the whole load current range by adopting different operation modes has been proposed and implemented. This thesis reports the steady-state analysis of each mode and a small-signal model for one of them. The buck converter uses a 100 nH inductor, and the last prototype shows a peak efficiency of 88.4% for the 2.5 V-to-1.2 V conversion. It complies with the radiation specifications, and mass production will soon start. The designed prototype ReSC converter employs a 12 nH inductor, and its area occupancy and thickness are respectively 20% and 55% lower than the buck. Its efficiency is larger than that of the buck converter in a range of conversion ratios and load currents, reaching a peak efficiency of 91.4% for the 2.5 V-to-1.2 V conversion. Radiation tests have highlighted that the converter complies with Total Ionizing Dose specifications. By introducing a few improvements, a future prototype could be close to production readiness.

EPFL2020

Magnetism and metal-organic self-assembly of rare-earth atoms on decoupling layers

Sébastien Reynaud

This thesis presents investigations of magnetic and structural properties of two dimensional metal-organic frameworks and of single atoms, both adsorbed on decoupling layers grown on metal surfaces, with focus on rare earth elements.We first report on a series of attempts at realizing self-assembled metal-organic networks on different decoupling layers, probed by scanning tunneling microscopy. The aim is to produce regular structures with high surface filling factors such that the magnetic properties of the rare earth atoms in the metal-organic networks can be investigated by X-ray ensemble measurements. The combinations of three molecular ligands (QDC, BDA, ZnTPyP) on three insulating layers (MgO, NaCl, graphene) with Tb as rare earth are reported. Of the three decoupling layers, only graphene is found to allow the synthesis of metal-organic structures. We successfully synthesized large islands of a rare earth-QDC coordination complex, with a majority of fivefold coordination of the rare earth atoms. The same structure is reproduced with Dy and Er.X-ray absorption spectroscopy, X-ray magnetic circular and linear dichroism measurements are then carried out on the Dy- and Er-QDC/gr/Ir(111) networks. Compared to single atoms on gr/Ir(111), both Dy and Er change their

4f

occupancy from 4

f^n

4f^{n-1}

and change their easy axis of magnetization. Both species are paramagnetic when incorporated into the metal-organic structure. The last part of the thesis is devoted to the study of Dy, Ho, and Gd on NaCl thin films. All three atoms display

4f

occupancy of the gas phase. The top-Cl adsorption site is determined with scanning tunneling microscopy. The magnetic properties are probed with X-ray absorption spectroscopy, X-ray magnetic circular and linear dichroism. Ho and Gd are paramagnetic. Dy has out-of-plane anisotropy with open hysteresis at non zero magnetic field. However, thermally assisted quantum tunneling of the magnetization prevents remanence at zero field.

EPFL2022

Methods to Enhance Nuclear Magnetic Resonance Sensitivity at High Magnetic Field

Claudia Christina Zanella

MR is a well-established technique routinely used in preclinical and clinical studies. This thesis focussed on the improvement of sensitivity of different methods in MR. Hyperpolarized 129Xe gas is used for studying pulmonary disease or cerebral perfusion. When hyperpolarization is conducted inside a polarizer, the achieved solid state polarization is currently limited to a few percent. One aim of this thesis was to counteract this bottleneck by investigating the effect of microwave frequency modulation for different spin systems. An increase in nuclear 129Xe spin polarization up to 14.5% was achieved compared to the polarization obtained without frequency modulation. Electron spin-lattice relaxation times T1S, as short as 5 ms, correlated directly with the gain in 129Xe nuclear polarization due to microwave frequency modulation, irrespective of the solvent or its deuteration. Simulations of the electron spin system confirmed that microwave frequency modulation could be an efficient method to considerably enhance nuclear spin polarization in short T1S matrices or in the presence of large linewidth radicals by promoting spectral diffusion. DNP matrices can also be hyperpolarized through non-persistent radicals generated by UV-irradiation. They have the advantage of quenching upon dissolution, yielding a hyperpolarized solution with no need for radical filtration. Radical precursors researched up to date either yielded low 13C polarization, contained toxic matrix components or interfered with metabolic processes. Therefore, the two novel endogenously-occurring precursors, alpha-ketovalerate (akV) and alpha-ketobutyrate (akB) were investigated. Liquid state polarization of the metabolic substrate glucose increased to 16.3% using akB compared with 13.3% obtained with pyruvate. [1-13C]butyric acid was polarized to 12.1% for akV and 12.9% for akB and used for in vivo hyperpolarized cardiac MRS. Hyperpolarized [1-13C]butyrate metabolism in the heart revealed label incorporation into a wide range of metabolites. This study demonstrated the potential of using UV-induced radicals generated in the endogenously-occurring metabolites akV and akB as polarizing agents, enabling high polarization without requiring radical filtration for radical-free hyperpolarized MRI. While MRI requires RF coils that generate high B1 homogeneity, MRS strongly depends on high sensitivity and potentially high B1 efficiency to allow for short-TE acquisitions. Two custom-made 1H coils resonating at 600 MHz, a single-channel saddle coil and an 8-leg quadrature birdcage coil, were investigated with respect to those criteria for applications at ultra-high field (14.1 T). The saddle coil yielded a 54% higher transmit field efficiency with a 20% higher SNR compared to the birdcage coil after full-FOV corrections. Using the saddle coil in glycoCEST imaging of a homogeneous phantom resulted in an MTR asymmetry coefficient of variation as small as 5.2% over an 11 mm diameter ROI. Overall, the saddle coil provided a good compromise between globally homogeneous excitation and high sensitivity. Finally, it was successfully used to map skeletal muscle glycogen content in vivo. This thesis focused on improving MR sensitivity by means of adequate custom-made RF coils as well as DNP through the implementation of a method capitalizing on electronic spin properties and the development of novel endogenous precursors for in vivo hyperpolarized MRI.

EPFL2021

Magnetism and metal-organic self-assembly of rare-earth atoms on decoupling layers

Sébastien Reynaud

4f

occupancy from 4

f^n

4f^{n-1}

4f

EPFL2022