Net Energy Gain (NEG) is a concept used in energy economics that refers to the difference between the energy expended to harvest an energy source and the amount of energy gained from that harvest. The net energy gain, which can be expressed in joules, differs from the net financial gain that may result from the energy harvesting process, in that various sources of energy (e.g. natural gas, coal, etc.) can be priced differently for the same amount of energy.
A net energy gain is achieved by expending less energy acquiring a source of energy than is contained in the source to be consumed. That is
Factors to consider when calculating NEG is the type of energy, the way energy is used and acquired, and the methods used to store or transport the energy. It is also possible to overcomplicate the equation by an infinite number of externalities and inefficiencies that may be present during the energy harvesting process.
The definition of an energy source is not rigorous. Anything that can provide energy to anything else can qualify. Wood in a stove is full of potential thermal energy; in a car, mechanical energy is acquired from the combustion of gasoline, and the combustion of coal is converted from thermal to mechanical, and then to electrical energy.
Examples of energy sources include:
Fossil fuels
Nuclear fuels (e.g., uranium and plutonium)
Radiation from the sun
Mechanical energy from wind, rivers, tides, etc.
Bio-fuels derived from biomass, in turn having consumed soil nutrients during growth.
Heat from within the earth (geothermal energy)
The term net energy gain can be used in slightly different ways:
The usual definition of net energy gain compares the energy required to extract energy (that is, to find it, remove it from the ground, refine it, and ship it to the energy user) with the amount of energy produced and transmitted to a user from some (typically underground) energy resource. To better understand this, assume an economy has a certain amount of finite oil reserves that are still underground, unextracted.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Solar power is the conversion of energy from sunlight into electricity, either directly using photovoltaics (PV) or indirectly using concentrated solar power. Photovoltaic cells convert light into an electric current using the photovoltaic effect. Concentrated solar power systems use lenses or mirrors and solar tracking systems to focus a large area of sunlight to a hot spot, often to drive a steam turbine.
Distributed generation, also distributed energy, on-site generation (OSG), or district/decentralized energy, is electrical generation and storage performed by a variety of small, grid-connected or distribution system-connected devices referred to as distributed energy resources (DER). Conventional power stations, such as coal-fired, gas, and nuclear powered plants, as well as hydroelectric dams and large-scale solar power stations, are centralized and often require electric energy to be transmitted over long distances.
Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially used for electricity generation and as photosensors. A photovoltaic system employs solar modules, each comprising a number of solar cells, which generate electrical power. PV installations may be ground-mounted, rooftop-mounted, wall-mounted or floating.
This course presents an overview of (i) the current energy system and uses (ii) the main principles of conventional and renewable energy technologies and (iii) the most important parameters that defin
This course examines the supply of energy from various angles: available resources, how they can be combined or substituted, their private and social costs, whether they can meet the demand, and how t
The course presents the fundamentals of energy demand in buildings while emphasizing the need for the comfort and well-being of occupants. In addition, prioritizations and trade-offs between energy an
Explores deformation and rupture of materials at low temperature, focusing on crystallographic relationships, mechanical twins, and twinning mechanisms.
The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...
2024
, , ,
The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...
Energy piles represent an innovative technology that can help provide sustainable geothermal heating or cooling energy for thermal conditioning purposes. In hot-dominated climates, the interest is to inject heat in the ground and extract energy for space-c ...