A stereo camera is a type of camera with two or more lenses with a separate or film frame for each lens. This allows the camera to simulate human binocular vision, and therefore gives it the ability to capture three-dimensional images, a process known as stereo photography. Stereo cameras may be used for making stereoviews and 3D pictures for movies, or for range imaging. The distance between the lenses in a typical stereo camera (the intra-axial distance) is about the distance between one's eyes (known as the intra-ocular distance) and is about 6.35 cm, though a longer base line (greater inter-camera distance) produces more extreme 3-dimensionality. In the 1950s, stereo cameras gained some popularity with the Stereo Realist and similar cameras that employed 135 film to make stereo slides. 3D pictures following the theory behind stereo cameras can also be made more inexpensively by taking two pictures with the same camera, but moving the camera a few inches either left or right. If the image is edited so that each eye sees a different image, then the image will appear to be 3D. This method has problems with objects moving in the different views, though works well with still life. Stereo cameras are sometimes mounted in cars to detect the lane's width and the proximity of an object on the road. Not all two-lens cameras are used for taking stereoscopic photos. A twin-lens reflex camera uses one lens to image to a focusing/composition screen and the other to capture the image on film. These are usually in a vertical configuration. Examples include would be a vintage Rolleiflex or a modern twin lens like a Mamiya C330. There have been many types of cameras that take stereo images, most of which are no longer manufactured. The most notable types are: Jules Richard Verascope, 1893. Kodak Stereo Camera – Kodak's own offering in the field of Realist format cameras which actually outsold the Realist during the five years it was available and might have eclipsed it in all time sales had it been introduced prior to the end of 1954.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related courses (13)
AR-219: Advanced CAO and Integrated Modeling DIM
1ère année: bases nécessaires à la représentation informatique 2D (3D). Passage d'un à plusieurs logiciels: compétence de choisir les outils adéquats en 2D et en 3D. Mise en relation des outils de CAO
ChE-204: Introduction to transport phenomena
This course aims at understanding the basic equations behind macroscopic and microscopic transport phenomena (mass, heat and momentum).
CIVIL-510: Quantitative imaging for engineers
First 2 courses are Tuesday 16-19h!This course will arm students with knowledge of different imaging techniques for practical measurements in many different fields of civil engineering. Modalities wil
Show more
Related lectures (34)
Introduction to Rhino: Transformations and Functions
Covers the basics of Rhino, focusing on transformations and basic functions.
Introduction to Rhino Surfaces and Meshes
Introduces working with surfaces, polysurfaces, and solids in Rhino, covering rendering, material editing, and mesh creation.
Introduction to Rhino: Surfaces and Meshes
Introduces the fundamentals of working with NURBS and surfaces in Rhino, covering tools for creating curves, surfaces, and meshes.
Show more
Related publications (144)

LenslessPiCam: A Hardware and Software Platform for Lensless Computational Imaging with a Raspberry Pi

Martin Vetterli, Eric Bezzam, Sepand Kashani, Matthieu Martin Jean-André Simeoni

This toolkit has everything you need to perform imaging with a lensless camera. We make use of a low-cost implementation of DiffuserCam, namely replacing the lens with a piece of tape and using the Raspberry Pi HQ camera sensor. Similar principles and meth ...
Zenodo2023

Learning for Multi-View Tracking

Ivan Vrkic

In response to the growing trend towards end-to-end learning, we propose a novel framework advancing towards an end-to-end multi-camera multi-object tracking (MC-MOT) solution that addresses challenges like occlusions, viewpoint variations, and illuminatio ...
2023

Ex uno plures: how to construct high-speed movies of collapsing cavitation bubbles from a single image

Mohamed Farhat, Davide Bernardo Preso, Armand Baptiste Sieber

The time-resolved visualization of the dynamics of a cavitation bubble usually requires the use of expensive high-speed cameras, which often provide a limited spatial resolution. In the present study, we propose an alternative to these high-speed imaging t ...
New York2023
Show more
Related concepts (4)
Image sensor
An image sensor or imager is a sensor that detects and conveys information used to form an . It does so by converting the variable attenuation of light waves (as they pass through or reflect off objects) into signals, small bursts of current that convey the information. The waves can be light or other electromagnetic radiation. Image sensors are used in electronic imaging devices of both analog and digital types, which include digital cameras, camera modules, camera phones, optical mouse devices, medical imaging equipment, night vision equipment such as thermal imaging devices, radar, sonar, and others.
Camera phone
A camera phone is a mobile phone which is able to capture photographs and often record video using one or more built-in digital cameras. It can also send the resulting image wirelessly and conveniently. The first commercial phone with color camera was the Kyocera Visual Phone VP-210, released in Japan in May 1999. Most camera phones are smaller and simpler than the separate digital cameras. In the smartphone era, the steady sales increase of camera phones caused point-and-shoot camera sales to peak about 2010 and decline thereafter.
Computer vision
Computer vision tasks include methods for , , and understanding digital images, and extraction of high-dimensional data from the real world in order to produce numerical or symbolic information, e.g. in the forms of decisions. Understanding in this context means the transformation of visual images (the input to the retina in the human analog) into descriptions of the world that make sense to thought processes and can elicit appropriate action.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.