Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In the framework of the NanoTera project CabTuRes, a system-in-package for a nano-resonator was proposed, integrating CMOS driving electronics and vacuum encapsulation. This doctoral research aimed to investigate 3D-integration technologies for a Single-Wa ...
The eutectic micro-constituent in SnAgCu solder governs the deformation behavior of the joint as it shows better deformation resistance than the Sn dendrites and occupies a high volume percentage of the whole solder. The main scope of this study is to deve ...
A System-in-Package (SiP) concept for the 3D-integration of a Single Wall Carbon Nanotube (SWCNT) resonator with its CMOS driving electronics is presented. The key element of this advanced SiP is the monolithic 3D-integration of the MEMS with the CMOS elec ...
SPIE - International Society of Optical Engineering2013
In directional solidification experiments on hypoperitectic Cu-Sn alloys at low velocity and high thermal gradient, both lamellar and fibrous coupled peritectic growth patterns have been observed. Two phenomena that had not been observed in previous experi ...
This thesis is focused on the study of the morphology of micropores formed during solidification of metallic alloys. Micropores constrained to form in well-developed dendritic solid network adopt complex non-spherical shapes. Previous studies using X-ray t ...
The crystallography of bainite, transformed isothermally at 450 °C in 0.2C-2.0Mn-1.5Si-0.6Cr steel, was investigated by electron backscatter diffraction (EBSD) analysis. The orientation relationship (OR) was found to be closer to Nishiyama-Wassermann (N-W) ...
Tantalum and hafnium carbides are classified as Ultra High Temperature Ceramics (UHTC) because of their extreme melting temperatures (above 3900 degrees C). Therefore, these materials can safely operate in the range of temperature that any other materials ...
Nonaqueous synthesis routes have emerged as a powerful platform for directly obtaining diverse metal oxide nanoparticles with high crystallinity and tunable compositions. The benzyl alcohol (BA) route, for example, has been applied toward dozens of oxides ...
Au-Ge-based alloys are potential substitutes for Pb-rich solders currently used for high-temperature applications. In the present work, the wetting behavior of two Au-Ge-X (X = Sb, Sn) ternary alloys, i.e., Au-15Ge-17Sb and Au-13.7 Ge-15.3Sn (at.%), in con ...
Phase equilibria in the CaO-Al2O3-Fe2O3-SO3 system have been studied, mainly at 1325 degrees C. In particular the solid solution compositions of ye'elimite Ca-4(Al6O12)SO4 and brownmillerite (C-2(A,F)) phases have been analysed and used to estimate the com ...