Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Previous work carried out in fully liquid environ-ments and at low current densities has demonstrated that highly uniform faceted copper nanocrystals display different selectivity profiles in CO2 reduction compared to polycrystalline copper. As part of ong ...
Lithium-ion batteries with enhanced rate performance are of crucial importance for practical applications. Extensive studies on the structural design and surface modification of electrode materials with the aim of improving the rate performance have been r ...
The pedestal structure, edge transport and linear MHD stability have been analyzed in a series of JET with the ITER-like wall hydrogen (H) and deuterium (D) type I ELMy H-mode plasmas. The pedestal pressure is typically higher in D than in H at the same in ...
The risk of concussion remains high in snow sports, even with a high helmet adoption rate. Novel helmet designs with enhanced energy dissipation are needed to solve this issue. In this study, helmet liners with bio-inspired honeycomb structures were propos ...
The dielectric elastomer actuator (DEA) is a technology known to potentially provide high energy density (0.3 - 0.4 J.cm(-3)). However, in the literature, few demonstrations have been done to evaluate this figure. To well understand the ability of this tec ...
Available, effectively converting low-frequency vibration into available electricity, triboelectric nanogenerator (TENG) is always research hot nowadays. However, the enhancing effect of the existing methods for the output have all sorts of drawbacks, i.e. ...
Rechargeable sodium (Na) metal batteries (SMBs) provide an alternative energy-dense, low-cost energy storage system beyond prevailing Li-ion technologies. However, their practical deployment requires the performance evaluation of Na anodes on the device le ...
High-energy-density and low-cost calcium (Ca) batteries have been proposed as 'beyond-Li-ion' electrochemical energy storage devices. However, they have seen limited progress due to challenges associated with developing electrolytes showing reductive/oxida ...
The emergence of wide bandgap power devices has brought the attention back to the flying capacitor (FC) multilevel inverters with a large number of stages, in an effort to increase the power density by minimizing the passive components. The main challenge ...
In this work, several carbon-decorated Na3V2(PO4)(3) materials (NVP@C-750/800/850) are successfully fabricated using a solgel approach and subsequent heat treatment. When NVP@C-800 is used as a cathode, it shows an ultralong cycle life (2000 cycles) at a h ...