Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Titanium alloys are considered as potential candidate structural materials for the first wall, the blanket and the magnetic coil structures of fusion reactors. Titanium alloys are interesting materials because of their high specific strength and low elasti ...
The retention behaviour of fission products in the material is therefore of special importance. 1 MeV iodine and cesium ions were implanted into yttria-stabilized zirconia (YSZ) and their depth profile was measured by Rutherford Backscattering after subseq ...
Theor. anal. of the reactor performance under unsteady-state conditions was carried out. The reactions are described by two kinetic models, which involve the participation in catalytic reaction of two types of active sites. The kinetic model I assumes the ...
A novel dismantlable monolithic-type electrochem. promoted catalytic reactor and "smart" sensor-catalytic reactor unit has been constructed and tested for hydrocarbon oxidn. and NO redn. by C2H4 in presence of O2. In this novel reactor, thin (.apprx.20-4 ...
The experimentally observed rise in the single pass methanol production with CO2 and H-2 (T = 200 degreesC, P = 4.3 bar) by in situ product removal over a perm-selective Nafion (R) membrane is verified by model simulations. For this purpose, software was d ...
Industry requires continuously new chemical processes to convert raw materials to valuable products limiting the formation of by-products. Since a few years, an increasing interest has been given to the intensification of chemical processes. This represent ...
This paper is the second part of a description of the online monitoring through ultrasound propagation velocity measurements of styrene polymn. in a continuous recycle reactor. A set of calibrations and a simple math. model are proposed to interpret the ex ...
Using electrodeposition from a bath of molten fluorides, single crystals of tetragonal beta-tantalum have been obtained for the first time at normal pressure. The unit-cell parameters are a = 10.211 (3), c = 5.3064 (10) Angstrom, space group P (4) over bar ...
In this article, a new treatment to reduce boron contamination of the interface between the p- and i- layer is presented. An ammonia flush, performed at 10 Pa for 1 min, after deposition of the p-layer considerably reduces the boron contamination at the p- ...
The catalytic cracking of methane over nickel gauze is proposed as an attractive alternative for the prodn. of CO-free hydrogen. The catalyst deactivates due to intensive coke deposition. Therefore, the reactor was operated periodically with the reaction f ...