Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
René SalathéRené Paul Salathé is Professor em. at EPFL since 2009. He is currently a technology consultant for several companies and he serves as an expert member of the Life Science team at the Swiss Innovation Agency (KTI/CTI) in Bern, on the scientific advisory board of the Fraunhofer-Institut für Lasertechnik ILT in Aachen, and he participates on expert panels for the Deutsche Forschungsgemeinschaft. He is a member of the Swiss Society for Optics and Microscopy, the European Optical Society, the Optical Society of America, a senior member of the IEEE, and a life time member of the Swiss Physical Society.
René Paul Salathé received the MS, PhD, and Habilitation (Privatdozent) degrees at the University of Bern in 1970, 1974, and 1979, respectively. Prior to his appointment at EPFL in 1989, he was directing the division "Material Testing and Technology" at the research and development center of the Swiss PTT. He has been active in the fields of semiconductor lasers, fibers, integrated optics, laser processing, and biomedical optics. The results of his research activities have been published more than 250 scientific contributions and 37 PhD theses at EPFL. Several start-up companies have been founded based on patents elaborated in his laboratory and/or by his PhD students. His actual research interests are in the areas of laser tweezers in micro-fluidics for biochemical applications and in optical fiber sensor applications.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Alexander TagantsevALEXANDER K. TAGANTSEV received the B.S. degree from St. Petersburg State University, in 1974, and Ph.D. degree from Ioffe Physico-Technical Institute, St. Petersburg, Russia, in 1982 in solid state physics. Before 1993, he worked in Ioffe Physico-Technical Institute, (1991-1993, head of laboratory), and St. Petersburg State Technical University (1991-1993, professor). He joined the ceramics laboratory of EPFL in 1993 where he was leading ( up to 2016) the section for Modeling and theory of Electroceramics. He is also currently engaged as a principle research fellow at Ioffe institute (St. Petersburg, Russia). Tagantsev is a theoretician of a broad domain of expertise from ferroelectricity and phonon physics to electrodynamics of superconductors and quantum optics. He is the author of key results on the theory of microwave dielectrics loss, dielectric polarization in crystalline materials, and relaxor ferroelectricity. He is also known in the field of ferroelectric thin films for elucidating works on the polarization switching and degradation in these systems. He authored or co-authored more than 300 scientific articles and two monograph (on domains in ferroics and tunable film bulk acoustic wave resonators). In 2007, Prof. Tagantsev was entitled to the Honors for lifetime achievement in the field of integrated ferroelectrics by the International Symposium on Integrated Ferroelectrics.
Christophe MoserDr. Christophe Moser is
Associate Professor of Microengineering and Industrial Relations
at the Swiss Federal Institute of Technology in Lausanne. He was the co-founder and CEO of
Ondax,Inc
for ten years prior to joining EPFL. During this decade, he raised $15 million from corporate and venture capital sources to fund volume production of thick holographic components in glass and develop devices enabled by these components such as tunable add-drop multiplexers for telecommunications, ultra-narrowband notch filters for low frequency Raman systems, high power semi-conductor frequency-narrowed pumps for fiber lasers, single frequency fixed and tunable lasers for sensing and femtosecond pulse compressors for micro-machining applications. Dr. Moser has a Ph.D. in Electrical Engineering from the California Institute of Technology, a minor in finance and a bachelor degree in Physics from EPFL.
He is the co-inventor of 24 patents, 14 peer reviewed scientific publications, 9 IEEE proceedings and a book chapter.
Private interests include tennis, running, ski, basketball and family excursions.
2010: Associate Professor, EPFL, faculty
Science Technique Ingenieur.
2000-2010: co-founder, CEO Ondax, Inc.
1995-2000: Graduate Research Assistant,
California Institute of Technology.
1993-1995: Engineering Project manager ,
TESA.
1988-1993: Bachelor candidate in Physics, EPFL.
MAIN PUBLICATIONS:
Moser C., Havermeyer F,.Ultra-narrowband tunable laserline notch filter, Appl. Phys. B, 95 (3), pp 597-601, 2009.
Moser C. ,Ho L., Havermeyer F,. Self-aligned Non-dispersive External Cavity Tunable Laser, 16 (21), 16691-16696 Optics Express, 2008.
Steckman, GJ , Moser C. et al. Volume holographic grating wavelength stabilized laser diodes, IEEE J. Of Selected Topics in Quantum Electronics, (13), 672-678, 2007.
Buse K, Havermeyer F, Liu W., Moser C, Psaltis D. Holographic Filters , Book Chapter Photorefractive Materials and their Applications, 2005.
Havermeyer, F; Liu, WH; Moser, C, et al. Volume holographic grating-based continuously tunable optical filter , Opt. Eng. 43 (9), 2017-2021, 2004.
Moser C., Maravic I., Schupp B., Adibi A, Psaltis D, Diffraction efficiency of localized holograms in doubly doped LiNbO3 crystals, Opt. Lett. 25: (17),1243-1245, 2000. Paul MuraltPaul Muralt received a diploma in experimental physics in 1978 at the Swiss Federal Institute of Technology ETH in Zurich. He accomplished his Ph.D. thesis in the field of commensurate-incommensurate phase transitions at the Solid State Laboratory of ETH. In the years 1984 and 1985 he held a post doctoral position at the IBM Research Laboratory in Zurich where he pioneered the application of scanning tunneling microscopy to surface potential imaging. In 1987, after a stay at the Free University of Berlin, he joined the Balzers group in Liechtenstein. He specialized in sputter deposition techniques, and managed since 1991 a department for development and applications of Physical Vapor Deposition and PECVD processes. In 1993, he joined the Ceramics Laboratory of EPFL in Lausanne. AS group leader for thin films and MEMS devices, he specialized in piezoelectric and pyroelectric MEMS with mostly Pb(Zr,Ti)O3 and AlN thin film. His research interests are in thin film growth in general, and more specifically in property assessment of small ferroelectric structures, in integration issues of ferroelectric and other polar materials, property-microstructure relationships, and applications of polar materials in semiconductor and micro-electro-mechanical devices. More recently he extended his interests to oxide thin films of ionic conductors. The focus in piezoelectric thin films was directed towards AlN-ScN alloys. He gives lectures in thin film processing, micro fabrication, and surface analysis. He authored or co-authored more than 230 scientific articles. He became Fellow of IEEE in 2013. In 2005, he received an outstanding achievement award at the International Symposium on Integrated Ferroelectrics (ISIF), and in 2016 the B.C. Sawyer Memorial award.
Chairman of the International Workshops on Piezoelectric MEMS(http://www.piezomems2011.org/) 