Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In several countries of central Europe, many modern residential buildings are braced by reinforced concrete (RC) and unreinforced masonry (URM) walls coupled with RC slabs. Such mixed constructions, in fact, behave better under seismic loading than buildin ...
Earthquake loads can induce out-of-plane deformations in thin reinforced concrete (RC) walls that may lead to member out-of-plane failure or cause a premature in-plane collapse. Such instability phenomena have been observed after the recent earthquakes in ...
Steel concentrically braced frames inherently provide great strength and stiffness, and are widely used for seismic resisting systems in buildings. These include conventional buckling braced frames and buckling restrained braced frames. Although the latter ...
Recent earthquakes in Chile (2010, M 8.8) and New Zealand (2011, M 6.3) have shown that, despite many years of extensive research and subsequent design code advancements, several modern reinforced concrete walls underperformed or even failed during these s ...
Reinforced concrete (RC) framed structures subjected to seismic loading often show localized deformations at the extremities of the members associated with the slippage of reinforcing bars along their anchorage length. Despite this phenomenon being respons ...
The performance of 11 different shear reinforcement systems against punching of inner slab-column connections under gravity loading was compared on the basis of experiments on 12 full-scale specimens, 8 of them newly reported. The slab geometry and flexura ...
Performance-based earthquake engineering requires numerical models that are able to reliably predict the expected component behavior of buildings under seismic excitations. The nonlinear modeling guidelines provided in ASCE-41-13 have historically been use ...
A series of seismic tests were conducted on a 1½-bay by 1½-story special steel moment-resisting frame subassembly from the onset of damage through incipient collapse. These tests were conducted using hybrid simulation with substructuring as a mean to demon ...
Concrete-filled steel tube (CFT) columns offer significant advantages over columns made of either steel or concrete alone, such as large energy dissipation and increased strength and stiffness. To further improve the seismic performance of these columns, a ...
In regions with low to moderate seismicity, unreinforced masonry (URM) is commonly used for the construction of low to mid-rise buildings. When these structures are subjected to seismic loading, the stiff URM walls attract considerable part of the lateral ...