Concept

Compression molding

Related publications (60)

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

Véronique Michaud, Vincent Werlen, Christian Rytka

Thermoplastic compression resin transfer moulding coupled with injection moulding is an appealing process for the production of thermoplastic composites. However, its implementation at an industrial scale remains challenging as variotherm injection mouldin ...

SAGE PUBLICATIONS LTD2022

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Christian Rytka, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

Resin Transfer molding of High-Fluidity Polyamide-6 with modified Glass-Fabric preforms

Véronique Michaud, Damiano Salvatori, Baris Çaglar, Robin Samuel Trigueira, Colin Gomez

In Resin Transfer Molding (RTM), resin precursors of thermoset or, more recently, thermoplastic polymers are generally employed, raising issues related to the chemical reaction taking place during and after part processing. In this study, already polymeriz ...

2021

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Yann Albert Gérard Lebaupin

In this paper, the low-energy impact behavior of a fully biobased composite made of bio-sourced polyamide 11 resin reinforced with flax fibers was investigated. Different composite laminates were studied in order to determine the stacking sequence effects ...

SAGE PUBLICATIONS LTD2019

3D spacers enhance flow kinetics in resin transfer molding with woven fabrics

Véronique Michaud, Damiano Salvatori, Baris Çaglar

Impregnation time in Resin Transfer Molding (RTM) is directly proportional to resin viscosity and inversely proportional to fabric permeability, limiting the use of high-viscosity resins with conventional reinforcements. In this study, we show how to reduc ...

2019

Hybrid Processing of Thermoplastic Based Multimaterials

Rajasundar Chandran

There is a growing interest in exploring novel material combinations and processing technology to manufacture complex 3D shaped polymer and composite structures. In the field of prosthetics and orthotics, this need is significant with additional challenges ...

EPFL2017

On the Limits of Precision Glass Molding for Diffractive Optical Elements

Karin Prater

Diffractive optical elements (DOEs) consist of surface reliefs with dimensions in the micrometer range and nanometer precision. Two technologies dominate: Elements replicated in plastic and directly microfabricated elements in fused silica. Plastic DOEs ar ...

EPFL2017

Efficiency Factors for Plastic Design in Concrete: Influence of Brittleness in Compression, High Tech Concrete: Where Technology and Engineering Meet

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

A large number of design approaches for structural concrete rely on the applicability of limit analysis. This is for instance the case of bending and shear design in members with transverse reinforcement, where it is assumed that plastic compression fields ...

2017

, , ,

Cellular thermoplastic structures with multiscale porosity (1–300 µm microporosity to 0.3–10 mm macroporosity) are produced from an integrated approach of 3D printing by Fused Deposition Modeling printing and Supercritical CO2 Foaming. Porous strands and r ...

2017

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.