Rechargeable battery | EPFL Graph Search

A rechargeable battery, storage battery, or secondary cell (formally a type of energy accumulator), is a type of electrical battery which can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. It is composed of one or more electrochemical cells. The term "accumulator" is used as it accumulates and stores energy through a reversible electrochemical reaction. Rechargeable batteries are produced in many different shapes and sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network. Several different combinations of electrode materials and electrolytes are used, including lead–acid, zinc–air, nickel–cadmium (NiCd), nickel–metal hydride (NiMH), lithium-ion (Li-ion), lithium iron phosphate (LiFePO4), and lithium-ion polymer (Li-ion polymer). Rechargeable batteries typically initially cost more than disposable batteries bu

Ageing of porous carbon electrodes

Manxi Zhu

Ultracapacitors, also called electrochemical double layer capacitors (EDLC) or supercapacitors, may improve the performance of conventional electrolytic capacitors in terms of specific energy, or improve the performance of rechargeable batteries in terms of specific power when combined with respective device. However, the application of ultracapacitors faces the problem of ageing – the deterioration of capacity and increase of equivalent series resistance of the system. This thesis intends to elucidate ageing mechanisms of ultracapacitors based on activated carbon electrodes with tetrafluoroborate in acetonitrile as electrolyte. Multi-method experimental investigations are presented which allow to obtain a comprehensive picture of ageing. Ultracapacitors were electrochemically aged under various conditions by applying voltages and temperatures close to the actual operation conditions. The influences of ageing on the electrodes were investigated by structural and chemical characterization. Gas volumetric measurement (porosimetry) and Raman spectroscopy were applied to follow the structural changes; elemental analysis, electron spectroscopy for chemical analysis (ESCA, XPS) and attenuated total reflection infrared spectroscopy (ATR-IR) were applied for chemical composition analysis. It was found that the changes of both structure and chemical composition, which occur on aged anodes and cathodes, are asymmetric. Aged anodes showed more significant changes such as stronger decrease of pore volume and specific area, and more complex chemical species. Chemically bound nitrogen species were found only on aged anodes, but not on fresh electrodes and aged cathodes. Based on the experimental results, several mechanisms for ageing are suggested. The functionalities in activated carbons play an important role for ageing. Various oxygen-containing functional groups can take part in the reactions. A higher amount of functionalities means that more electroactive sites can be found on the graphene sheets in activated carbons to promote electrochemical reactions. Thus one can assume that less functional groups in activate carbons would be preferable for the stability of ultracapacitors. Ageing tests were carried out on individual components of the electrodes, mainly on activated carbon powders and conductive carbon additives. Observations are consistent with those on assembled electrodes. It turned out that the activated carbons from synthetic resin precursors, which have fewer oxygen functional groups, suffer less from ageing than those from natural precursors with more oxygen functional groups. A similar phenomenon was also observed on the conductive agents.

EPFL2006

In situ visualizing the interplay between the separator and potassium dendrite growth by synchrotron X-ray tomography

Yong Li, Fu Sun, Xuchen Wang, Chao Yang, Kangning Zhao

Rechargeable potassium (K) batteries are a promising next-generation technology for low-cost grid scale energy storage applications. Nevertheless, the undesirable interfacial instabilities originating from the interplay between the employed separators and electrodes largely compromise the battery?s performance, and the underlying mechanism of which remains elusive. Herein, the interfacial stability between three types of commercial separators (Celgard 2325, Celgard 2400 and GF/D) and the K electrodeposits is investigated in K|K symmetric cells via in-situ Synchrotron X-ray tomography technique. It is demonstrated that the cell built with a Celgard 2400 separator can achieve a stable cycling performance due to its high mechanical strength and integrity along the thickness direction, thus alleviating the K dendrites growth. In contrast, a GF/D membrane of low mechanical cohesion and excessive porosity is found to be easily deformed and filled with deciduous potassium dendritic aggregates during battery cycling. Similarly, the tri-layer Celgard 2325 separators, which are weakly bonded by interlaminar forces, are found to be severely delaminated by the overgrowth of K dendrites. Furthermore, it is revealed that the delamination failure behaviors of Celgard 2325 is driven by the local stress induced by the spatially and heterogeneously formed "dead" K dendrites. Our work provides direct visualization of morphological evolvement of the separators in presence of potassium dendrites in K|K symmetric cells and highlights the significance of mechanical cohesion, porosity distribution and mechanical integrity of separators in dictating the battery?s performance under realistic battery operation conditions. As a result, these discoveries provide an indepth understanding that is needed to design next-generation high performance separators to mitigate the formation of potassium dendrite in KMBs.

ELSEVIER2021

A short review on surface chemical aspects of Li batteries: A key for a good performance

We review herein several important aspects of surface chemistry in Li-ion batteries, and discuss the use of ionic liquids (ILs) for rechargeable Li batteries. We explored the suitability of ILs for 5 V cathodes and Li-graphite anodes. Some advantages of the use of ILs to attenuate the thermal behavior of delithiated cathode materials are demonstrated. We also report briefly on a comparative study of the following cathode materials: LiNi0.5Mn0.5O2; LiNi0.33Mn0.33Co0.33O2; LiNi0.4Mn0.4Co0.2O2; LiNi0.8Co0.15Al0.05O2 and LiMnPO4, in standard electrolyte solutions based on mixtures of alkyl carbonates and LiPF6. We also discuss aging, rate capability, cycle life and surface chemistry of these cathode materials. The techniques applied included electrochemical measurements, e.g., XRD, HRTEM, Raman spectroscopy, XPS and FRIR spectroscopy. We found that ILs based on cyclic quaternary alkyl ammonium cations may provide much better electrolyte solutions for 5 V cathodes than standard electrolyte solutions. while being quite suitable for Li-graphite electrodes. All the lithiated transition metal oxides studied (as mentioned above) develop unique surface chemistry during aging and cycling due to the acid-base and nucleophilic reactions of their surface oxygen anions. LiMn0.33Ni0.33Co0.33O2 has the highest rate capability compared to all the other above-mentioned cathode materials. Cathodes comprising nanometric size carbon-coated LiMnPO4 produced by HPL demonstrate a better rate capability than LiNi0.5Mn0.5O2 and LiNi0.8Co0.15Al0.05O2 cathodes. The former material seems to be the least surface reactive with alkyl carbonates/LiPF6 solutions, among all the cathode materials explored herein. (C) 2008 Elsevier B.V. All rights reserved.

2009