Concept

Blow molding

Related publications (39)

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Evaluation of a New Process for the Additive Manufacturing of Metal Antennas

This paper presents a new process for additively manufacturing purely metallic antennas based on Fused Deposition Modeling (FDM), with a proprietary filament developed using a hot extrusion method and composed by a mix of rounded shape copper powders with ...

2023

Sustainable polyesters via direct functionalization of lignocellulosic sugars

François Maréchal, Véronique Michaud, Yves Leterrier, Harm-Anton Klok, Jeremy Luterbacher, Maxime Alexandre Clément Hedou, Adrien Julien Demongeot, Graham Reid Dick, Christèle Rayroud, Thibault Rambert

The development of sustainable plastics from abundant renewable feedstocks has been limited by the complexity and efficiency of their production, as well as their lack of competitive material properties. Here we demonstrate the direct transformation of the ...

2022

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

Véronique Michaud, Vincent Werlen, Christian Rytka

Thermoplastic compression resin transfer moulding coupled with injection moulding is an appealing process for the production of thermoplastic composites. However, its implementation at an industrial scale remains challenging as variotherm injection mouldin ...

SAGE PUBLICATIONS LTD2022

On the Limits of Precision Glass Molding for Diffractive Optical Elements

Karin Prater

Diffractive optical elements (DOEs) consist of surface reliefs with dimensions in the micrometer range and nanometer precision. Two technologies dominate: Elements replicated in plastic and directly microfabricated elements in fused silica. Plastic DOEs ar ...

EPFL2017

Hybrid Processing of Thermoplastic Based Multimaterials

Rajasundar Chandran

There is a growing interest in exploring novel material combinations and processing technology to manufacture complex 3D shaped polymer and composite structures. In the field of prosthetics and orthotics, this need is significant with additional challenges ...

EPFL2017

Screening method for the onset of bonding of molten polyamide resin layers to continuous fiber reinforced laminate sheets

Martyn Douglas Wakeman

Thermoplastic polymer composites (TPC) with multiple fabric layers of continuous fiber reinforcement are laminate sheets designed to be thermally stamped and overmolded leading to low cycle times and thus high volume composite parts. Injection over-molding ...

2016

Fabrication of slender elastic shells by the coating of curved surfaces

François Gallaire, Pedro Miguel Nunes Pereira de Almeida Reis, Gioele Mariano Nicolò Balestra, Pierre-Thomas Paul Brun

Various manufacturing techniques exist to produce double-curvature shells, including injection, rotational and blow molding, as well as dip coating. However, these industrial processes are typically geared for mass production and are not directly applicabl ...

Nature Publishing Group2016

Precision glass molding of high-resolution diffractive optical elements

Hans Peter Herzig, Toralf Scharf, Karin Prater

The demand of high resolution diffractive optical elements (DOE) is growing. Smaller critical dimensions allow higher deflection angles and can fulfill more demanding requirements, which can only be met by using electron-beam lithography. Replication techn ...

Spie-Int Soc Optical Engineering2016

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.