Weather station | EPFL Graph Search

A weather station is a facility, either on land or sea, with instruments and equipment for measuring atmospheric conditions to provide information for weather forecasts and to study the weather and climate. The measurements taken include temperature, atmospheric pressure, humidity, wind speed, wind direction, and precipitation amounts. Wind measurements are taken with as few other obstructions as possible, while temperature and humidity measurements are kept free from direct solar radiation, or insolation. Manual observations are taken at least once daily, while automated measurements are taken at least once an hour. Weather conditions out at sea are taken by ships and buoys, which measure slightly different meteorological quantities such as sea surface temperature (SST), wave height, and wave period. Drifting weather buoys outnumber their moored versions by a significant amount. Weather instruments Weather instrumentation Typical weather stations have the following inst

Improving the Turbulence Coupling between High Resolution Numerical Weather Prediction Models and Lagrangian Particle Dispersion Models

Balazs Szintai

For the modelling of the transport and diffusion of atmospheric pollutants during accidental releases, sophisticated emergency response systems are used. These modelling systems usually consist of three main parts. The atmospheric flow conditions can be simulated with a numerical weather prediction (NWP) model. The evolution of the pollutant cloud is described with a dispersion model of variable complexity. The NWP and the dispersion models have to be coupled with a so-called meteorological pre-processor. This means that all the necessary – in most cases turbulence related – variables which are not available from the standard output of the NWP model have to be diagnosed. The main difficulty of the turbulence coupling is that these subgrid scale variables of NWP models are not routinely verified and thus little is known concerning their quality and impact on dispersion processes. The general aim of the present work is to better understand and improve this coupling mechanism. For this purpose all the three main components of the emergency response system of MeteoSwiss are carefully evaluated and possible improvement strategies are suggested. In the first part, the NWP component of the system, namely the COSMO model, is investigated focusing on the model performance in the Planetary Boundary Layer (PBL). Three case studies, representing both unstable and stable situations, are analyzed and the COSMO simulations are validated with turbulence measurements and Large Eddy Simulation (LES) data. It is shown that the COSMO model is able to reproduce the main evolution of the boundary layer in dry convective situations with the operational parameter setting. However, it is found that the COSMO model tends to simulate a too moist and too cold PBL with shallower PBL heights than observed. During stable conditions the operational parameter setting has to be significantly modified (e.g., the minimum diffusion coefficient) to obtain a good model performance. The turbulence scheme of COSMO, which carries a prognostic equation for Turbulent Kinetic Energy (TKE), is studied in detail to understand the shortcomings of the simulations. The turbulent transport term (third order moment) in the TKE equation is found to be significantly underestimated by the COSMO model during unstable situations. This results in inaccurate TKE profiles and hence missing entrainment fluxes at the top of the PBL. A solution to increase the TKE transport in the PBL is proposed in the present work and evaluated during a three-month continuous period. While improving the TKE profile substantially, the modification is demonstrated to not impair other model output characteristics. The second component of the emergency response system, namely the meteorological pre-processor, is also validated on case studies and a continuous period. The main objective of this analysis is to compare the currently operational coupling approach, which is based on the direct usage of the prognostic TKE from the COSMO model, to a classical approach based on similarity theory considerations, thereby using turbulence measurements on the one hand and LES data on the other hand. To be able to use similarity theory approaches for the determination of turbulence characteristics, the PBL height has first to be diagnosed from the NWP model. In the present study, several approaches for the determination of PBL height have been implemented and validated with radio sounding measurements. Based on the verification results and the operational convenience, the method based on the bulk Richardson number method has been chosen for the diagnosis of the PBL height. Validation results of post-diagnosed turbulence characteristics show that during convective situations, the similarity approach tends to overestimate the turbulence intensity, while the approach based on the direct usage of TKE yields more accurate results. For stable conditions the different approaches are closer to each other and both give reasonable predictions. It is found that the main drawback of the direct approach is the isotropic assumption in the horizontal direction. A new hybrid method is proposed which uses similarity considerations for the partitioning of horizontal TKE between along-wind and cross-wind directions. In the last part, pollutant dispersion in complex terrain is studied using a new scaling approach for TKE that is suited for steep and narrow Alpine valleys. This scaling approach is introduced in the interface between COSMO and a Lagrangian particle dispersion model (LPDM), and its results are compared to those of a classical similarity theory approach and to the operational coupling type, which uses the TKE from the COSMO model directly. For the validation of the modelling system, the TRANSALP-89 tracer experiment is used, which was conducted in highly complex terrain in southern Switzerland. The ability of the COSMO model to simulate the valley-wind system is assessed with several meteorological surface stations. The dispersion simulation is evaluated with the measurements from 25 surface samplers. The sensitivity of the modelling system towards the soil moisture, horizontal grid resolution, and boundary layer height determination is investigated. It is shown that if the flow field is correctly reproduced, the new scaling approach improves the tracer concentration simulation compared to the classical coupling methods.

EPFL2010

Undercatch Adjustments for Tipping-Bucket Gauge Measurements of Solid Precipitation

Audrey Reverdin

Heated tipping-bucket (TB) gauges are used broadly in national weather monitoring networks, but their performance for the measurement of solid precipitation has not been well characterized. Manufacturer-provided TB gauges were evaluated at five test sites during the World Meteorological Organization Solid Precipitation Intercomparison Experiment (WMO-SPICE), with most gauge types tested at more than one site. The test results were used to develop and evaluate adjustments for the undercatch of solid precipitation by heated TB gauges. New methods were also developed to address challenges specific to measurements from heated TB gauges. Tipping-bucket transfer functions were created specifically to minimize the sum of errors over the course of the adjusted multiseasonal accumulation. This was based on the hypothesis that the best transfer function produces the most accurate long-term precipitation records, rather than accurate catch efficiency measurements or accurate daily or hourly precipitation measurements. Using this new approach, an adjustment function derived from multiple gauges was developed that performed better than traditional gauge-specific and multigauge catch efficiency derived adjustments. Because this new multigauge adjustment was developed using six different types of gauges tested at five different sites, it may be applicable to solid precipitation measurements from unshielded heated TB gauges that were not evaluated in WMO-SPICE. In addition, this new method of optimizing transfer functions may be useful for other types of precipitation gauges, as it has many practical advantages over the traditional catch efficiency methods used to derive undercatch adjustments.

AMER METEOROLOGICAL SOC2020

Wind profile prediction in an urban canyon: a machine learning approach

Roberto Castello, Gianluca Mancini, Dasaraden Mauree, Tullio Nutta, Jean-Louis Scartezzini, Tianchu Zhang

Resolving the wind profile in an urban canyon environment means dealing with the turbulent nature of the stream and the presence of non-negligible flux exchanges with the atmosphere inside the canopy, making any deterministic model solution computationally very intensive. In this paper, a learning-from-data method is explored, which is able to predict the wind speed in an urban canyon at different heights, given a minimal set of input features. The experimental location is provided by a street canyon located at the Swiss Federal Institute of Technology campus in Lausanne, equipped with several measuring stations to record data at high temporal resolution. Different machine learning approaches are compared in order to predict the wind speed in two directions and at different heights inside the urban canyon: an optimized Ridge Regression outperforms the Random Forest algorithm. We find particularly high accuracy in predicting the wind speed in the highest part of the canyon. None of the proposed algorithms however is able to model in an accurate way the variation of the wind speed close to the ground.

IOP2019

Improving the Turbulence Coupling between High Resolution Numerical Weather Prediction Models and Lagrangian Particle Dispersion Models

Balazs Szintai

EPFL2010